[mythtv-users] Still Can't Get pcHDTV-3000 Installed

Steve Adeff adeffs at gmail.com
Sun Jan 1 12:23:57 EST 2006


On Sunday 01 January 2006 12:05, Drew Tomlinson wrote:
> I have MythTV 0.18.1 running with a PVR-250 card.  About two months ago,
> I added a pcHDTV-3000 card but still can't figure out how it get it
> recognized by the OS.  I'm running 2.6.13-r5 on Gentoo.  At one point,
> someone here told me all I had to do was select the DVB modules and
> re-compile my kernel.  Specifically, I've navigated to Device Drivers
> ---> Multimedia devices ---> and have selected "Video for Linux" to be
> compiled as a module.  Under "Video For Linux" is an indented "Video for
> Linux".  If I select that, I'm presented with a list of video adapters.
>
> >From the list, I've selected "Conexant 2388x (bt878 successor) support"
>
> (for my PVR-250?).  There is also an option labeled "DVB Support for
> cx2388x based TV cards".  I don't think I need that but I've tried it
> both ways.
>
> Then back up to the "Video For Linux" main screen and I select "Digital
> Video Broadcasting Devices  ---> " and have these two entries in the list:
>
> [*] DVB For Linux
>  <M>   DVB Core Support
>
> Nothing else is set.  At the bottom of the list, I entered the
> "Customise DVB Frontends  --->" submenu and selected the following:
>
> <M>  OR51132 based (pcHDTV HD3000 card)
>
> Nothing else is set.  This option is only available when I don't select
> "DVB Support for cx2388x based TV cards" in the "Video For Linux"
> section.  I've tried it both ways but no matter which, I get this output
> from dmesg:
>
> cx88xx: disagrees about version of symbol tveeprom_hauppauge_analog
> cx88xx: Unknown symbol tveeprom_hauppauge_analog
> cx8800: Unknown symbol cx88_reset
> cx8800: Unknown symbol cx88_call_i2c_clients
> cx8800: Unknown symbol cx88_wakeup
> cx8800: Unknown symbol cx88_risc_stopper
> cx8800: Unknown symbol cx88_print_irqbits
> cx8800: Unknown symbol cx88_set_scale
> cx8800: Unknown symbol cx88_shutdown
> cx8800: Unknown symbol cx88_vdev_init
> cx8800: Unknown symbol cx88_core_put
> cx8800: Unknown symbol cx88_audio_thread
> cx8800: Unknown symbol cx88_core_irq
> cx8800: Unknown symbol cx88_core_get
> cx8800: Unknown symbol cx88_get_stereo
> cx8800: Unknown symbol cx88_set_tvnorm
> cx8800: Unknown symbol cx88_risc_buffer
> cx8800: Unknown symbol cx88_set_stereo
> cx8800: Unknown symbol cx88_sram_channels
> cx8800: Unknown symbol cx88_set_tvaudio
> cx8800: Unknown symbol cx88_sram_channel_dump
> cx8800: Unknown symbol cx88_sram_channel_setup
> cx8800: Unknown symbol cx88_print_ioctl
> cx8800: Unknown symbol cx88_free_buffer
> cx8800: Unknown symbol cx88_boards
> cx8800: Unknown symbol cx88_newstation
> cx88xx: disagrees about version of symbol tveeprom_hauppauge_analog
> cx88xx: Unknown symbol tveeprom_hauppauge_analog
> cx8802: Unknown symbol cx88_reset
> cx8802: Unknown symbol cx88_wakeup
> cx8802: Unknown symbol cx88_risc_stopper
> cx8802: Unknown symbol cx88_print_irqbits
> cx8802: Unknown symbol cx88_shutdown
> cx8802: Unknown symbol cx88_core_irq
> cx8802: Unknown symbol cx88_sram_channels
> cx8802: Unknown symbol cx88_sram_channel_dump
> cx8802: Unknown symbol cx88_sram_channel_setup
> cx8802: Unknown symbol cx88_free_buffer
> cx8802: Unknown symbol cx88_boards
> cx8802: Unknown symbol cx88_risc_databuffer
> cx88_dvb: Unknown symbol cx8802_fini_common
> cx88_dvb: Unknown symbol cx88_core_put
> cx88_dvb: Unknown symbol cx88_core_get
> cx88_dvb: Unknown symbol cx8802_resume_common
> cx88_dvb: Unknown symbol cx8802_buf_prepare
> cx88_dvb: Unknown symbol cx8802_init_common
> cx88_dvb: Unknown symbol cx88_free_buffer
> cx88_dvb: Unknown symbol cx88_boards
> cx88_dvb: Unknown symbol cx8802_buf_queue
> cx88_dvb: Unknown symbol cx8802_suspend_common
>
> And finally, here is my 'lspci' output:
>
> tv init.d # lspci
> 0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
> version?) (rev c1)
> 0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1
> (rev c1)
> 0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4
> (rev c1)
> 0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3
> (rev c1)
> 0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2
> (rev c1)
> 0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5
> (rev c1)
> 0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
> 0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
> 0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller
> (rev a4)
> 0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller
> (rev a4)
> 0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller
> (rev a4)
> 0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet
> Controller (rev a1)
> 0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge
> (rev a3)
> 0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
> 0000:00:0c.0 PCI bridge: nVidia Corporation nForce2 PCI Bridge (rev a3)
> 0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire
> (IEEE 1394) Controller (rev a3)
> 0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
> 0000:01:06.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI
> Video and Audio Decoder (rev 05)
> 0000:01:06.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
> Audio Decoder [MPEG Port] (rev 05)
> 0000:01:07.0 SCSI storage controller: Advanced System Products, Inc
> ABP940-U2W
> 0000:01:09.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
> 0000:01:09.1 Input device controller: Creative Labs SB Audigy MIDI/Game
> port (rev 03)
> 0000:01:09.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
> 0000:01:0a.0 Multimedia video controller: Internext Compression Inc
> iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
> 0000:01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112
> [SATALink/SATARaid] Serial ATA Controller (rev 02)
> 0000:02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated
> Fast Ethernet Controller [Tornado] (rev 40)
> 0000:03:00.0 VGA compatible controller: nVidia Corporation NV18
> [GeForce4 MX 4000 AGP 8x] (rev c1)
>
> I am under the assumption that the HD-3000 card is one of the Multimedia
> controllers listed and thus, is installed correctly.  Or am I wrong?
>
> Thanks for any assistance.  I am absolutely stuck on something that
> shouldn't be this difficult, judging from the lack of current Google
> hits on the subject.  :)
>
> Thanks,
>
> Drew
>

I was going to say you don't need to recompile kernels for this card, but then 
I saw your running Gentoo...
anyway:
http://www.penlug.org/twiki/bin/view/Main/DigitalTelevisionDVB

-- 
Steve


More information about the mythtv-users mailing list