[mythtv-users] Still Can't Get pcHDTV-3000 Installed

Drew Tomlinson drew at mykitchentable.net
Sun Jan 1 12:58:33 EST 2006


On 1/1/2006 9:23 AM Steve Adeff said the following:

>On Sunday 01 January 2006 12:05, Drew Tomlinson wrote:
>  
>
>>I have MythTV 0.18.1 running with a PVR-250 card.  About two months ago,
>>I added a pcHDTV-3000 card but still can't figure out how it get it
>>recognized by the OS.  I'm running 2.6.13-r5 on Gentoo.  At one point,
>>someone here told me all I had to do was select the DVB modules and
>>re-compile my kernel.  Specifically, I've navigated to Device Drivers
>>---> Multimedia devices ---> and have selected "Video for Linux" to be
>>compiled as a module.  Under "Video For Linux" is an indented "Video for
>>Linux".  If I select that, I'm presented with a list of video adapters.
>>
>>>From the list, I've selected "Conexant 2388x (bt878 successor) support"
>>
>>(for my PVR-250?).  There is also an option labeled "DVB Support for
>>cx2388x based TV cards".  I don't think I need that but I've tried it
>>both ways.
>>
>>Then back up to the "Video For Linux" main screen and I select "Digital
>>Video Broadcasting Devices  ---> " and have these two entries in the list:
>>
>>[*] DVB For Linux
>> <M>   DVB Core Support
>>
>>Nothing else is set.  At the bottom of the list, I entered the
>>"Customise DVB Frontends  --->" submenu and selected the following:
>>
>><M>  OR51132 based (pcHDTV HD3000 card)
>>
>>Nothing else is set.  This option is only available when I don't select
>>"DVB Support for cx2388x based TV cards" in the "Video For Linux"
>>section.  I've tried it both ways but no matter which, I get this output
>>from dmesg:
>>
>>cx88xx: disagrees about version of symbol tveeprom_hauppauge_analog
>>cx88xx: Unknown symbol tveeprom_hauppauge_analog
>>cx8800: Unknown symbol cx88_reset
>>cx8800: Unknown symbol cx88_call_i2c_clients
>>cx8800: Unknown symbol cx88_wakeup
>>cx8800: Unknown symbol cx88_risc_stopper
>>cx8800: Unknown symbol cx88_print_irqbits
>>cx8800: Unknown symbol cx88_set_scale
>>cx8800: Unknown symbol cx88_shutdown
>>cx8800: Unknown symbol cx88_vdev_init
>>cx8800: Unknown symbol cx88_core_put
>>cx8800: Unknown symbol cx88_audio_thread
>>cx8800: Unknown symbol cx88_core_irq
>>cx8800: Unknown symbol cx88_core_get
>>cx8800: Unknown symbol cx88_get_stereo
>>cx8800: Unknown symbol cx88_set_tvnorm
>>cx8800: Unknown symbol cx88_risc_buffer
>>cx8800: Unknown symbol cx88_set_stereo
>>cx8800: Unknown symbol cx88_sram_channels
>>cx8800: Unknown symbol cx88_set_tvaudio
>>cx8800: Unknown symbol cx88_sram_channel_dump
>>cx8800: Unknown symbol cx88_sram_channel_setup
>>cx8800: Unknown symbol cx88_print_ioctl
>>cx8800: Unknown symbol cx88_free_buffer
>>cx8800: Unknown symbol cx88_boards
>>cx8800: Unknown symbol cx88_newstation
>>cx88xx: disagrees about version of symbol tveeprom_hauppauge_analog
>>cx88xx: Unknown symbol tveeprom_hauppauge_analog
>>cx8802: Unknown symbol cx88_reset
>>cx8802: Unknown symbol cx88_wakeup
>>cx8802: Unknown symbol cx88_risc_stopper
>>cx8802: Unknown symbol cx88_print_irqbits
>>cx8802: Unknown symbol cx88_shutdown
>>cx8802: Unknown symbol cx88_core_irq
>>cx8802: Unknown symbol cx88_sram_channels
>>cx8802: Unknown symbol cx88_sram_channel_dump
>>cx8802: Unknown symbol cx88_sram_channel_setup
>>cx8802: Unknown symbol cx88_free_buffer
>>cx8802: Unknown symbol cx88_boards
>>cx8802: Unknown symbol cx88_risc_databuffer
>>cx88_dvb: Unknown symbol cx8802_fini_common
>>cx88_dvb: Unknown symbol cx88_core_put
>>cx88_dvb: Unknown symbol cx88_core_get
>>cx88_dvb: Unknown symbol cx8802_resume_common
>>cx88_dvb: Unknown symbol cx8802_buf_prepare
>>cx88_dvb: Unknown symbol cx8802_init_common
>>cx88_dvb: Unknown symbol cx88_free_buffer
>>cx88_dvb: Unknown symbol cx88_boards
>>cx88_dvb: Unknown symbol cx8802_buf_queue
>>cx88_dvb: Unknown symbol cx8802_suspend_common
>>
>>And finally, here is my 'lspci' output:
>>
>>tv init.d # lspci
>>0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
>>version?) (rev c1)
>>0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1
>>(rev c1)
>>0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4
>>(rev c1)
>>0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3
>>(rev c1)
>>0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2
>>(rev c1)
>>0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5
>>(rev c1)
>>0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
>>0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
>>0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller
>>(rev a4)
>>0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller
>>(rev a4)
>>0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller
>>(rev a4)
>>0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet
>>Controller (rev a1)
>>0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge
>>(rev a3)
>>0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
>>0000:00:0c.0 PCI bridge: nVidia Corporation nForce2 PCI Bridge (rev a3)
>>0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire
>>(IEEE 1394) Controller (rev a3)
>>0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
>>0000:01:06.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI
>>Video and Audio Decoder (rev 05)
>>0000:01:06.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
>>Audio Decoder [MPEG Port] (rev 05)
>>0000:01:07.0 SCSI storage controller: Advanced System Products, Inc
>>ABP940-U2W
>>0000:01:09.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
>>0000:01:09.1 Input device controller: Creative Labs SB Audigy MIDI/Game
>>port (rev 03)
>>0000:01:09.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
>>0000:01:0a.0 Multimedia video controller: Internext Compression Inc
>>iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
>>0000:01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112
>>[SATALink/SATARaid] Serial ATA Controller (rev 02)
>>0000:02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated
>>Fast Ethernet Controller [Tornado] (rev 40)
>>0000:03:00.0 VGA compatible controller: nVidia Corporation NV18
>>[GeForce4 MX 4000 AGP 8x] (rev c1)
>>
>>I am under the assumption that the HD-3000 card is one of the Multimedia
>>controllers listed and thus, is installed correctly.  Or am I wrong?
>>
>>Thanks for any assistance.  I am absolutely stuck on something that
>>shouldn't be this difficult, judging from the lack of current Google
>>hits on the subject.  :)
>>
>>Thanks,
>>
>>Drew
>>
>>    
>>
>
>I was going to say you don't need to recompile kernels for this card, but then 
>I saw your running Gentoo...
>anyway:
>http://www.penlug.org/twiki/bin/view/Main/DigitalTelevisionDVB
>  
>

Thank you very much!  I'll read it and see if I can get any further...  :)

Drew




More information about the mythtv-users mailing list