[mythtv-users] Still Can't Get pcHDTV-3000 Installed

Drew Tomlinson drew at mykitchentable.net
Sun Jan 1 12:05:53 EST 2006


I have MythTV 0.18.1 running with a PVR-250 card.  About two months ago, 
I added a pcHDTV-3000 card but still can't figure out how it get it 
recognized by the OS.  I'm running 2.6.13-r5 on Gentoo.  At one point, 
someone here told me all I had to do was select the DVB modules and 
re-compile my kernel.  Specifically, I've navigated to Device Drivers 
---> Multimedia devices ---> and have selected "Video for Linux" to be 
compiled as a module.  Under "Video For Linux" is an indented "Video for 
Linux".  If I select that, I'm presented with a list of video adapters.  
>From the list, I've selected "Conexant 2388x (bt878 successor) support" 
(for my PVR-250?).  There is also an option labeled "DVB Support for 
cx2388x based TV cards".  I don't think I need that but I've tried it 
both ways.

Then back up to the "Video For Linux" main screen and I select "Digital 
Video Broadcasting Devices  ---> " and have these two entries in the list:

[*] DVB For Linux
 <M>   DVB Core Support

Nothing else is set.  At the bottom of the list, I entered the 
"Customise DVB Frontends  --->" submenu and selected the following:

<M>  OR51132 based (pcHDTV HD3000 card)

Nothing else is set.  This option is only available when I don't select 
"DVB Support for cx2388x based TV cards" in the "Video For Linux" 
section.  I've tried it both ways but no matter which, I get this output 
from dmesg:

cx88xx: disagrees about version of symbol tveeprom_hauppauge_analog
cx88xx: Unknown symbol tveeprom_hauppauge_analog
cx8800: Unknown symbol cx88_reset
cx8800: Unknown symbol cx88_call_i2c_clients
cx8800: Unknown symbol cx88_wakeup
cx8800: Unknown symbol cx88_risc_stopper
cx8800: Unknown symbol cx88_print_irqbits
cx8800: Unknown symbol cx88_set_scale
cx8800: Unknown symbol cx88_shutdown
cx8800: Unknown symbol cx88_vdev_init
cx8800: Unknown symbol cx88_core_put
cx8800: Unknown symbol cx88_audio_thread
cx8800: Unknown symbol cx88_core_irq
cx8800: Unknown symbol cx88_core_get
cx8800: Unknown symbol cx88_get_stereo
cx8800: Unknown symbol cx88_set_tvnorm
cx8800: Unknown symbol cx88_risc_buffer
cx8800: Unknown symbol cx88_set_stereo
cx8800: Unknown symbol cx88_sram_channels
cx8800: Unknown symbol cx88_set_tvaudio
cx8800: Unknown symbol cx88_sram_channel_dump
cx8800: Unknown symbol cx88_sram_channel_setup
cx8800: Unknown symbol cx88_print_ioctl
cx8800: Unknown symbol cx88_free_buffer
cx8800: Unknown symbol cx88_boards
cx8800: Unknown symbol cx88_newstation
cx88xx: disagrees about version of symbol tveeprom_hauppauge_analog
cx88xx: Unknown symbol tveeprom_hauppauge_analog
cx8802: Unknown symbol cx88_reset
cx8802: Unknown symbol cx88_wakeup
cx8802: Unknown symbol cx88_risc_stopper
cx8802: Unknown symbol cx88_print_irqbits
cx8802: Unknown symbol cx88_shutdown
cx8802: Unknown symbol cx88_core_irq
cx8802: Unknown symbol cx88_sram_channels
cx8802: Unknown symbol cx88_sram_channel_dump
cx8802: Unknown symbol cx88_sram_channel_setup
cx8802: Unknown symbol cx88_free_buffer
cx8802: Unknown symbol cx88_boards
cx8802: Unknown symbol cx88_risc_databuffer
cx88_dvb: Unknown symbol cx8802_fini_common
cx88_dvb: Unknown symbol cx88_core_put
cx88_dvb: Unknown symbol cx88_core_get
cx88_dvb: Unknown symbol cx8802_resume_common
cx88_dvb: Unknown symbol cx8802_buf_prepare
cx88_dvb: Unknown symbol cx8802_init_common
cx88_dvb: Unknown symbol cx88_free_buffer
cx88_dvb: Unknown symbol cx88_boards
cx88_dvb: Unknown symbol cx8802_buf_queue
cx88_dvb: Unknown symbol cx8802_suspend_common

And finally, here is my 'lspci' output:

tv init.d # lspci
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different 
version?) (rev c1)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 
(rev c1)
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 
(rev c1)
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 
(rev c1)
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 
(rev c1)
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 
(rev c1)
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller 
(rev a4)
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller 
(rev a4)
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller 
(rev a4)
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet 
Controller (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge 
(rev a3)
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:0c.0 PCI bridge: nVidia Corporation nForce2 PCI Bridge (rev a3)
0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire 
(IEEE 1394) Controller (rev a3)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
0000:01:06.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI 
Video and Audio Decoder (rev 05)
0000:01:06.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and 
Audio Decoder [MPEG Port] (rev 05)
0000:01:07.0 SCSI storage controller: Advanced System Products, Inc 
ABP940-U2W
0000:01:09.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
0000:01:09.1 Input device controller: Creative Labs SB Audigy MIDI/Game 
port (rev 03)
0000:01:09.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
0000:01:0a.0 Multimedia video controller: Internext Compression Inc 
iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
0000:01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112 
[SATALink/SATARaid] Serial ATA Controller (rev 02)
0000:02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated 
Fast Ethernet Controller [Tornado] (rev 40)
0000:03:00.0 VGA compatible controller: nVidia Corporation NV18 
[GeForce4 MX 4000 AGP 8x] (rev c1)

I am under the assumption that the HD-3000 card is one of the Multimedia 
controllers listed and thus, is installed correctly.  Or am I wrong?

Thanks for any assistance.  I am absolutely stuck on something that 
shouldn't be this difficult, judging from the lack of current Google 
hits on the subject.  :)

Thanks,

Drew





More information about the mythtv-users mailing list