[mythtv-users] Re: System hangs when I run /sbin/modprobe ivtv
David Hampton
hampton at employees.org
Sun Mar 7 05:13:04 EST 2004
On Fri, 2004-02-20 at 16:04, Gabe wrote:
>
> Following Jarod's HowTo, I get the ivtv part, and when I modprobe
> ivtv, the system hangs.
Same here. No problems following the guide up to this point. When I
"modprobe ivtv" I see the exact same thing on an Asus P4P800 motherboard
with a Hauppauge PVR-250MCE card.
> There is nothing in /var/log for ivtv, but I don't know if there
> should be or not.
I caught the following before one hang:
Mar 7 01:29:29 mythtv kernel: Linux video capture interface: v1.00
Mar 7 01:29:29 mythtv kernel: i2c-core.o: i2c core module version 2.8.4 (20040207)
Mar 7 01:29:29 mythtv kernel: ivtv: version 0.1.9 (release) loading
Mar 7 01:29:29 mythtv kernel: ivtv: SGarray_size = 340, DSGarray_size = 16
Mar 7 01:29:29 mythtv kernel: ivtv: Found an iTVC15 based chip
Mar 7 01:29:29 mythtv kernel: tuner: chip found @ 0xc2
Mar 7 01:29:29 mythtv kernel: tuner(bttv): type forced to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) [insmod]
Mar 7 01:29:29 mythtv kernel: saa7114.c: starting probe for adapter ivtv i2c driver #0 (0x10005)
Mar 7 01:29:29 mythtv kernel: saa7114.c: detecting saa7114 client on address 0x42
Mar 7 01:29:29 mythtv kernel: saa7115.c: writing init values
Mar 7 01:29:31 mythtv kernel: status: (1E) 0x50, (1F) 0xc0
Mar 7 01:29:31 mythtv kernel: msp34xx: init: chip=MSP3448W-A2, has NICAM support
Mar 7 01:29:31 mythtv kernel: msp3410: daemon started
The next time I tried I only saw the three 'ivtv' lines. These hangs
happen regardless of whether I run a uniprocessor or smp kernel. I'm
running 2.4.22-1.2174.nptl_37.rhfc1.at. The PVR-250 is reported by
lspci as:
02:09.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 4801
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
I have the following ivtv related rpms installed:
ivtv-0.1.9-24.rhfc1.at
ivtv-firmware-2.02.023-3.at
ivtv-kmdl-2.4.22-1.2174.nptl_37.rhfc1.at-0.1.9-24.rhfc1.at
ivtv-kmdl-smp-2.4.22-1.2174.nptl_37.rhfc1.at-0.1.9-24.rhfc1.at
The ivtv-firmware-2.02.023-3.at rpm contains the hauppauge
pvr250_18_22035.exe firmware file.
I'm stumped. Anyone have any suggestions?
David
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://mythtv.org/pipermail/mythtv-users/attachments/20040307/10b84033/attachment.pgp
More information about the mythtv-users
mailing list