[mythtv-users] Update programs from EIT

[Josu Lazkano]

OK, the problem is from the USB stick, I change the DVB-T adapter and
it works: http://i48.tinypic.com/vwprpg.png

So now I must investigate why my new DVB-T adapter fails (KWorld
PlusTV Dual DVB-T Stick (DVB-T 399U)).

Where can I ask? In this mail list?

Thanks and regards.

2010/5/30 Josu Lazkano <josu.lazkano at gmail.com>:
> OK, I start to config the backend this way:
>
> Capture cards: http://i50.tinypic.com/opjpi.png
> Adapter0 config: http://i47.tinypic.com/168aeqc.jpg
> Adapter0 recordings: http://i45.tinypic.com/acwdp1.png
> Adapter0 config: http://i47.tinypic.com/35jl2c7.png
> Adapter0 recordings: http://i48.tinypic.com/j9lshu.png
>
> And that is what I have on the fronted: http://i48.tinypic.com/es3vae.png
>
> I wait some hours but there is not EIT info, it works well on 0.22 version.
>
> Thanks for all!
>
> 2010/5/29 Josu Lazkano <josu.lazkano at gmail.com>:
>> Thank you very much Nick!!!
>>
>> I will try when arrive home, I never config nothing on the "Recording
>> Options", I am learning step by step.
>>
>> Thanks and regards.
>>
>> 2010/5/29 Nick Morrott <knowledgejunkie at gmail.com>:
>>> On 29 May 2010 16:50, Josu Lazkano <josu.lazkano at gmail.com> wrote:
>>>> 2010/5/29, Nick Morrott <knowledgejunkie at gmail.com>:
>>>>>
>>>>> If you are using only EIT for programme information, you _do not_ need
>>>>>  to run mythfilldatabase. You only need to run mythfilldatabase if you
>>>>>  are using Schedules Direct or XMLTV. Programme listeings do not
>>>>>  "magically" appear for EIT if you run mythfilldatabase. As your log
>>>>>  shows that you have 2 video sources using EIT defined, are you using
>>>>>  another tuner besides the DVB-T device?
>>>>
>>>> The DVB-T device is a twin tuner, I have two devices on /dev/dvb/.
>>>
>>> OK - but see my comments below...
>>>
>>>>>
>>>>>  If you still have no programme listings, your problem is elsewhere. If
>>>>>  you are using active EIT scanning, you need to leave the backend for
>>>>>  some time to collect information in the background. If you are using
>>>>>  passive EIT, programme data is only collected during recordings.
>>>>
>>>> I don't know how to configure active or passive scaning.
>>>
>>> This is configured on the Capture Card pages when configuring a DVB
>>> card. Choose the "Recording Options" button next to the  "DiSEqC"
>>> button to get access the "Use DVB Card for active EIT scan" option.
>>>
>>>> I configure on the "mythtv-setup" to take programs from EIT and
>>>> configure on the Input both devices to EIT video source, is this the
>>>> correct config?
>>>
>>> If you have 2 DVB-T inputs (e.g. 2 separate cards, or 2 inputs on a
>>> dual tuner card) that are receiving the same* channels, you need to
>>> create only 1 video source, and then attach that single video source
>>> to both DVB-T inputs on the Input Connections page in mythtv-setup.
>>>
>>> * I mean the cards tune to the same multiplex frequencies, and the
>>> list of available channels is the same
>>>
>>> Finally, some dual tuner cards have better stability by having the
>>> first tuner set to active EIT collection, and the second tuner using
>>> passive EIT collection.
>>>
>>> Cheers,
>>> Nick
>>>
>>> --
>>> Nick Morrott
>>>
>>> MythTV Official wiki: http://mythtv.org/wiki/
>>> MythTV users list archive: http://www.gossamer-threads.com/lists/mythtv/users
>>>
>>> "An investment in knowledge always pays the best interest." - Benjamin Franklin
>>> _______________________________________________
>>> mythtv-users mailing list
>>> mythtv-users at mythtv.org
>>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>>
>>
>>
>>
>> --
>> Josu Lazkano
>>
>
>
>
> --
> Josu Lazkano
>



-- 
Josu Lazkano