[mythtv-users] Update programs from EIT
josu.lazkano at gmail.com
Sun May 30 08:39:50 UTC 2010
OK, I start to config the backend this way:
Capture cards: http://i50.tinypic.com/opjpi.png
Adapter0 config: http://i47.tinypic.com/168aeqc.jpg
Adapter0 recordings: http://i45.tinypic.com/acwdp1.png
Adapter0 config: http://i47.tinypic.com/35jl2c7.png
Adapter0 recordings: http://i48.tinypic.com/j9lshu.png
And that is what I have on the fronted: http://i48.tinypic.com/es3vae.png
I wait some hours but there is not EIT info, it works well on 0.22 version.
Thanks for all!
2010/5/29 Josu Lazkano <josu.lazkano at gmail.com>:
> Thank you very much Nick!!!
> I will try when arrive home, I never config nothing on the "Recording
> Options", I am learning step by step.
> Thanks and regards.
> 2010/5/29 Nick Morrott <knowledgejunkie at gmail.com>:
>> On 29 May 2010 16:50, Josu Lazkano <josu.lazkano at gmail.com> wrote:
>>> 2010/5/29, Nick Morrott <knowledgejunkie at gmail.com>:
>>>> If you are using only EIT for programme information, you _do not_ need
>>>> to run mythfilldatabase. You only need to run mythfilldatabase if you
>>>> are using Schedules Direct or XMLTV. Programme listeings do not
>>>> "magically" appear for EIT if you run mythfilldatabase. As your log
>>>> shows that you have 2 video sources using EIT defined, are you using
>>>> another tuner besides the DVB-T device?
>>> The DVB-T device is a twin tuner, I have two devices on /dev/dvb/.
>> OK - but see my comments below...
>>>> If you still have no programme listings, your problem is elsewhere. If
>>>> you are using active EIT scanning, you need to leave the backend for
>>>> some time to collect information in the background. If you are using
>>>> passive EIT, programme data is only collected during recordings.
>>> I don't know how to configure active or passive scaning.
>> This is configured on the Capture Card pages when configuring a DVB
>> card. Choose the "Recording Options" button next to the "DiSEqC"
>> button to get access the "Use DVB Card for active EIT scan" option.
>>> I configure on the "mythtv-setup" to take programs from EIT and
>>> configure on the Input both devices to EIT video source, is this the
>>> correct config?
>> If you have 2 DVB-T inputs (e.g. 2 separate cards, or 2 inputs on a
>> dual tuner card) that are receiving the same* channels, you need to
>> create only 1 video source, and then attach that single video source
>> to both DVB-T inputs on the Input Connections page in mythtv-setup.
>> * I mean the cards tune to the same multiplex frequencies, and the
>> list of available channels is the same
>> Finally, some dual tuner cards have better stability by having the
>> first tuner set to active EIT collection, and the second tuner using
>> passive EIT collection.
>> Nick Morrott
>> MythTV Official wiki: http://mythtv.org/wiki/
>> MythTV users list archive: http://www.gossamer-threads.com/lists/mythtv/users
>> "An investment in knowledge always pays the best interest." - Benjamin Franklin
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
> Josu Lazkano
More information about the mythtv-users