[mythtv-users] cards vs sources vs inputs confusion, problems and possible bugs

Petr Stehlik pstehlik at sophics.cz
Thu Dec 3 22:26:50 UTC 2009

Petr Stehlik píše v Čt 03. 12. 2009 v 23:07 +0100:

> No wait, this happens only for ArrowUp/Down. Entering channums directly
> works properly.

actually not even those. When both cards are recording then live TV does
not let me go to the other card using channum from the multiplex that is
being recorded on the other card.

The only moment when the live TV works normally is when there the tuner
it wants to use (first or last) is free from any recordings. When the
tuner is busy it's a pain and there are multiple bugs including browse
mode getting stuck with top CPU usage, wrong current channel (zero)
making the up/down arrows hard to use and switching to another free
tuner seems impossible.

2009-12-03 23:17:47.607 ChannelBase(10): Looking for startchannel '1' on input 'DVBInput #1'
2009-12-03 23:17:47.631 ChannelBase(10): IsTunable(DVBInput #3,1) Channel is valid, but tuner is busy on different multiplex (479 != 477)
2009-12-03 23:17:47.637 DVBSH(/dev/dvb/adapter3/frontend0): RemoveListener(0xa4c5b5b8) -- begin
2009-12-03 23:17:47.640 DVBSH(/dev/dvb/adapter3/frontend0): RemoveListener(0xa4c5b5b8) -- locked
2009-12-03 23:17:47.641 DVBSH(/dev/dvb/adapter3/frontend0): RemoveListener(0xa4c5b5b8) -- end
2009-12-03 23:17:47.695 ChannelBase(10) Warning: Setting start channel '1' failed, 
			selected to '6' on input 'DVBInput #3' instead.
2009-12-03 23:17:47.771 TVRec(10): On same multiplex

I just want the live TV to look for the other startchannel '1' that is
found on other input of a completely free tuner...


More information about the mythtv-users mailing list