[mythtv-users] Issues with Antec Fusion 430, Hauppauge-WinTV-PVR-150 w/ remote and Mythbuntu 7.10
glafranceweb at yahoo.com
Fri Jan 18 10:31:47 UTC 2008
Actually I only have /dev/lirc0 in there.
irw doesn't give my anything, but mode2 and irrecord do...
I just looked at the remote itself, it says "RC6" at the back.
----- Original Message ----
From: Henrik Beckman <henrik.list at gmail.com>
To: Discussion about mythtv <mythtv-users at mythtv.org>
Sent: Friday, January 18, 2008 4:25:09 AM
Subject: Re: [mythtv-users] Issues with Antec Fusion 430, Hauppauge-WinTV-PVR-150 w/ remote and Mythbuntu 7.10
I suspect that your problem is that lirc detects multiple remote recivers, the one in your case and the one on the card.
I´m working on a similar problem at home sto this is BETA info!
Run the command irw do you get anything when you push the keys ?
If not do an ls /dev/lirc* I suspect that you get several lirc and lircd there, so for each lircd do
irw /dev/lircd(number) and try with the remote
No signal, you might need to modify /etc/init.d/lirc and change /dev/lirc0 to /dev/lirc1 and /dev/lirc/0 to /dev/lirc/1
Then try to run irw again.
Once you get something back from irw on /dev/lircd you should be good to go.
On 1/18/08, G L < glafranceweb at yahoo.com> wrote:
> Hello everybody,
> I'm trying to setup a Mythbuntu 7.10 computer with the following hardware:
> -Antec Fusion 430
> -Biostar TF7050-M2 motherboard
> -Hauppauge-WinTV-PVR-150 card (comes with a remote control)
> -Wireless LAN card, 2GB ram, 500GB harddrive
> My two main problems right now are:
> 1. Getting the remote that came with my PVR-150 to work with the IR receiver built in the VFD screen.
> 2. Getting the VFD screen to show things
> First, about the remote.
> With irrecord, I can make little . dots appear when I press on buttons
on the remote. With mode2 I can get it to show things like "code:
0x800f041e" when I press
> on buttons on the remote. I cannot make irw react
though, it's like I'm not doing anything.
> In Mythbuntu Control Centre -> Remote Control, I have 'Hauppauge TV
> When I load MythTV, it doesn't react at all to keypresses on the
More information about the mythtv-users