[mythtv-users] Toshiba Renza 42LX196 Modeline

[Melvin J. Cureton]

I am using the above LCD TV and am trying to get 1080p working over HDMI.
 
Opteron 240
2GB DDR 333
ATI 9550 AGP VGA/DVI/S-Video/Composite
17" LCD Monitor (1280x1024) on VGA
42" LCD TV (480i,480p,720p,1080i,1080p) on DVI to HDMI cable
 
# Xorg configuration created by system-config-display
Section "ServerLayout"
        Identifier     "Multihead layout"
        Screen      0  "Screen0" LeftOf "Screen1"
        Screen      1  "Screen1" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        Option      "Xinerama" "off"
        Option      "Clone" "on"
EndSection
Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "us"
EndSection
Section "Monitor"
        Identifier   "Monitor1"
        VendorName   "Monitor Vendor"
        ModelName    "LCD Panel 1280x1024"
 ### Comment all HorizSync and VertSync values to use DDC:
        HorizSync    31.5 - 67.0
        VertRefresh  50.0 - 75.0
        Option      "dpms"
EndSection
Section "Device"
        Identifier  "Videocard0"
        Driver      "radeon"
EndSection
Section "Device"
        Identifier  "Videocard1"
        Driver      "radeon"
        VendorName  "Videocard Vendor"
        BoardName   "ATI Technologies Inc RV350 AS [Radeon 9550]"
        BusID       "PCI:2:0:0"
        Screen      1
        Option "MonitorLayout" "TMDS, TMDS"
EndSection
Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes    "1920x1080_60" "1280x720_60"
        EndSubSection
EndSection
Section "Screen"
        Identifier "Screen1"
        Device     "Videocard1"
        Monitor    "Monitor1"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Depth     24
                Modes    "1280x1024" "1280x960" "1280x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

When I right click on the dekstop and go to display it shows a resolution of 1920x540. Any ideas why? Is it due to the dual head setup? I'd rather just run the tv on DVI alone but I see no post/boot info which I'd like to be able to watch for errors.
 
 
Thank You
Melvin Cureton
melvincureton at melcrys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20070504/1ef4dc49/attachment.htm