[mythtv-users] DViCO Fusion HDTV 5 Gold NTSC setup
Jason Gabriele
jason.gabriele at gmail.com
Sun Jan 15 04:49:19 UTC 2006
I also could get the Fusion 5 Gold working as a QAM tuner but had trouble
with analog tuning. You should be able to set it up just like any other v4l
card. I was able to get mine to work but the picture appears washed out
(looks fine with QAM) and also the sound doesn't come in until you change
the channel. There are some serious problems with the cx88 drivers even in
the latest kernel (I also am using 2.6.15), so I don't think we are the only
ones. BTW, it looks as though you have the correct drivers loaded. You may
want to make sure it's detecting the correct card using dmesg and try using
tvtime to tune some channels.
> -----Original Message-----
> I've got the subject card working as an HD (ATSC) receiver, but can't
> figure out how to get it to receiver NTSC channels. I defined a V4L
> capture card in the 'Capture cards' section of mythtv-setup. It then
> shows up as a device of /dev/v4l/video0. But when I go to scan those
> channels, nothing shows up. And I know that there's several VHF and UHF
> channels on standard NTSC broadcast. I also tried setting the 'TV
> format: in the Global Backend setup to NTSC (even though that didn't
> make a lot of sense, and logically wouldn't be the right thing to do for
> the ATSC 'part' of the card)....
>
> Has anyone gotten this to work?
>
> On a 'plus' note, I did manage (I think) to get both this card and a
> HD5000 card to both work at the same time (both in ATSC mode). I'm
> running gentoo and had to emerge the 2.6.15-gentoo kernel. But after
> configuration, both cards worked...
>
> Its possible that I didn't follow the Fusion Gold instructions correctly
> and don't have the correct module compiled to actually pick up NTSC...
> Which device driver would that be? Here's my lsmod output:
>
> Module Size Used by
> cx88_dvb 10756 0
> cx8802 11780 1 cx88_dvb
> or51132 11012 1 cx88_dvb
> video_buf_dvb 7044 1 cx88_dvb
> nxt200x 14660 1 cx88_dvb
> cx22702 7876 1 cx88_dvb
> cx8800 30412 0
> cx88xx 60064 3 cx88_dvb,cx8802,cx8800
> i2c_algo_bit 10184 1 cx88xx
> video_buf 20228 5
> cx88_dvb,cx8802,video_buf_dvb,cx8800,cx88xx
> ir_common 10756 1 cx88xx
> tveeprom 17104 1 cx88xx
> v4l1_compat 12996 1 cx8800
> v4l2_common 8384 1 cx8800
> btcx_risc 6216 3 cx8802,cx8800,cx88xx
> videodev 10944 2 cx8800,cx88xx
> b2c2_flexcop_pci 9048 0
> b2c2_flexcop 25292 1 b2c2_flexcop_pci
> mt352 8324 2 cx88_dvb,b2c2_flexcop
> bcm3510 10948 1 b2c2_flexcop
> firmware_class 10560 4 or51132,nxt200x,b2c2_flexcop,bcm3510
> stv0299 11912 1 b2c2_flexcop
> dvb_core 76700 3 video_buf_dvb,b2c2_flexcop,stv0299
> dvb_pll 11844 5
> cx88_dvb,or51132,nxt200x,cx22702,b2c2_flexcop
> nxt2002 9988 1 b2c2_flexcop
> stv0297 9088 1 b2c2_flexcop
> lgdt330x 9756 2 cx88_dvb,b2c2_flexcop
> mt312 9476 1 b2c2_flexcop
> i2c_core 19712 15
> cx88_dvb,or51132,nxt200x,cx22702,cx88xx,i2c_algo_bit,tveeprom,b2c2_flexcop
> ,mt352,bcm3510,stv0299,nxt2002,stv0297,lgdt330x,mt312
> nvidia 4855408 8
> snd_intel8x0 32424 0
> snd_ac97_codec 99288 1 snd_intel8x0
> snd_ac97_bus 4480 1 snd_ac97_codec
> snd_pcm 82312 2 snd_intel8x0,snd_ac97_codec
> snd_timer 22024 1 snd_pcm
> snd 48072 4
> snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
> snd_page_alloc 11024 2 snd_intel8x0,snd_pcm
More information about the mythtv-users
mailing list