[mythtv-users] PVR 350 ans Suse9.1

[Juergen Sachs]

Am Fr, den 24.09.2004 schrieb Michael T. Dean um 4:03:
> With Chris Kennedy's current patches, it is important that you get rid 
> of all the ivtv configuration junk in your mod{ules,probe}.conf file.  
> The only lines related to ivtv should be:
> 
> alias char-major-81 videodev
> alias char-major-81-0 ivtv
> 
> Please try loading with only these lines and then post the output from 
> the ivtv init.  You can grab the init information with:
> 
> tac /var/log/messages |
> sed -n '/=  END INIT IVTV  =/,/= START INIT IVTV =/p;
>            /= START INIT IVTV =/q' |
> tac
Thanks a lot for this. I found some options in the
/etc/modprobe.conf.local file and removed them. Now the video output
works fine.
But I did not get any sound.....

According to some postings, I removed the msp3400.ko file and searched
for duplicates. Then I reinstalled ivtv (do a "amke install" again). No
change.

attached is the output of your codelines.

Tanks for your fast help.

Juergen




Sep 24 13:52:52 linux kernel: ivtv: ==================== START INIT IVTV
====================
Sep 24 13:52:52 linux kernel: ivtv: version 0.1.10 (0.1.10pre2-ck111w)
loading
Sep 24 13:52:52 linux kernel: ivtv: Linux version: 2.6.5-7.108-default
586 REGPARM gcc-3.3
Sep 24 13:52:52 linux kernel: ivtv: In case of problems please include
the debug info
Sep 24 13:52:52 linux kernel: ivtv: between the START INIT IVTV and END
INIT IVTV lines when
Sep 24 13:52:52 linux kernel: ivtv: mailing the ivtv-devel mailinglist.
Sep 24 13:52:52 linux kernel: ivtv: Autodetected WinTV PVR 350 card
Sep 24 13:52:52 linux kernel: ivtv: Found an iTVC15 based chip
Sep 24 13:52:52 linux kernel: ivtv: XXX PCI device: 0x0746 vendor:
0x1039
Sep 24 13:52:52 linux kernel: ivtv: i2c attach [client=unset,ok]
Sep 24 13:52:52 linux kernel: ir-kbd-i2c: i2c IR (Hauppauge) detected at
i2c-1/1-0018/ir0
Sep 24 13:52:52 linux kernel: msp34xx: ivtv version
Sep 24 13:52:52 linux kernel: msp34xx: init: chip=MSP3418W-A2, has NICAM
support, simple (D) mode, simpler (G) no-thread mode
Sep 24 13:52:52 linux kernel: msp34xx: $Id$ compiled on: Sep 24 2004
01:50:37
Sep 24 13:52:52 linux kernel: ivtv: i2c attach [client=MSP3418W-A2,ok]
Sep 24 13:52:52 linux kernel: saa7115: starting probe for adapter ivtv
i2c driver #0 (0x10005)
Sep 24 13:52:52 linux kernel: saa7115: detecting saa7115 client on
address 0x42
Sep 24 13:52:52 linux kernel: saa7115: writing init values
Sep 24 13:52:52 linux kernel: ivtv: i2c attach [client=saa7115[1],ok]
Sep 24 13:52:52 linux kernel: saa7115: status: (1E) 0x48, (1F) 0xc0
Sep 24 13:52:52 linux kernel: tuner: chip found at addr 0xc2 i2c-bus
ivtv i2c driver #0
Sep 24 13:52:52 linux kernel: ivtv: i2c attach [client=(tuner unset),ok]
Sep 24 13:52:52 linux kernel: tuner: type set to 5 (Philips PAL_BG
(FI1216 and compatibles)) by insmod option
Sep 24 13:52:52 linux kernel: tveeprom: Hauppauge: model = 48134, rev =
J342, serial# = 7067189
Sep 24 13:52:52 linux kernel: tveeprom: tuner = Temic 4009FR5 (idx = 42,
type = 20)
Sep 24 13:52:52 linux kernel: tveeprom: tuner fmt = PAL(B/G) (eeprom =
0x04, v4l2 = 0x00000007)
Sep 24 13:52:52 linux kernel: tveeprom: audio_processor = CS5331 (type =
9)
Sep 24 13:52:52 linux kernel: ivtv: i2c attach [client=tveeprom[1],ok]
Sep 24 13:52:52 linux kernel: ivtv: Tuner Type 20, Tuner formats
0x00000007, Radio: yes, Model 0x00a93512, Revision 0x00000001
Sep 24 13:52:52 linux kernel: ivtv: PAL tuner detected
Sep 24 13:52:52 linux kernel: ivtv: Radio detected
Sep 24 13:52:52 linux kernel: saa7127: unsupported module, tainting
kernel.
Sep 24 13:52:52 linux kernel: saa7127: video encoder driver version V
0.3 loaded
Sep 24 13:52:52 linux kernel: saa7127: Selecting NTSC video Standard
Sep 24 13:52:52 linux kernel: saa7127: Selecting S-Video+Composite
Sep 24 13:52:52 linux kernel: saa7127: Turn WSS off
Sep 24 13:52:52 linux kernel: saa7127: Widescreen Mode 4:3 Full Format
Sep 24 13:52:52 linux kernel: saa7127: Selecting Normal Encoder Input
Sep 24 13:52:52 linux kernel: saa7127: Enable Video Output
Sep 24 13:52:52 linux kernel: ivtv: i2c attach [client=saa7127[0],ok]
Sep 24 13:52:53 linux kernel: ivtv: Encoder revision: 0x02040011
Sep 24 13:52:53 linux kernel: ivtv: Decoder revision: 0x02020023
Sep 24 13:52:53 linux kernel: ivtv: Configuring WinTV PVR 350 card with
9 streams
Sep 24 13:52:53 linux kernel: ivtv: Create DMA stream 0 using 32 131072
byte buffers  4194304 kbytes total
Sep 24 13:52:53 linux kernel: ivtv: Registered v4l2 device, streamtype 0
minor 0
Sep 24 13:52:53 linux kernel: ivtv: Create DMA stream 1 using 8 131072
byte buffers  1048576 kbytes total
Sep 24 13:52:53 linux kernel: ivtv: Registered v4l2 device, streamtype 1
minor 32
Sep 24 13:52:53 linux kernel: ivtv: Create stream 2 using 256 4096 byte
buffers  1048576 kbytes total
Sep 24 13:52:53 linux kernel: ivtv: Registered v4l2 device, streamtype 2
minor 224
Sep 24 13:52:53 linux kernel: ivtv: Create DMA stream 3 using 8 131072
byte buffers  1048576 kbytes total
Sep 24 13:52:53 linux kernel: ivtv: Registered v4l2 device, streamtype 3
minor 24
Sep 24 13:52:53 linux kernel: ivtv: Create stream 4
Sep 24 13:52:53 linux kernel: ivtv: Registered v4l2 device, streamtype 4
minor 64
Sep 24 13:52:53 linux kernel: ivtv: Create DMA stream 5 using 512 4096
byte buffers  2097152 kbytes total
Sep 24 13:52:53 linux kernel: ivtv: Registered v4l2 device, streamtype 5
minor 16
Sep 24 13:52:53 linux kernel: ivtv: Create stream 6 using 256 4096 byte
buffers  1048576 kbytes total
Sep 24 13:52:53 linux kernel: ivtv: Registered v4l2 device, streamtype 6
minor 228
Sep 24 13:52:53 linux kernel: ivtv: Create stream 7
Sep 24 13:52:53 linux kernel: ivtv: Registered v4l2 device, streamtype 7
minor 232
Sep 24 13:52:53 linux kernel: ivtv: Create DMA stream 8 using 256 4096
byte buffers  1048576 kbytes total
Sep 24 13:52:53 linux kernel: ivtv: Registered v4l2 device, streamtype 8
minor 48
Sep 24 13:52:53 linux kernel: ivtv: Setting Tuner 20
Sep 24 13:52:53 linux kernel: tuner: type already set to 5, ignoring
request for 20
Sep 24 13:52:53 linux kernel: ivtv: Setting audio matrix to input 3,
output 1
Sep 24 13:52:53 linux kernel: ivtv: Switching standard to PAL.
Sep 24 13:52:53 linux kernel: saa7115: decoder set norm PAL
Sep 24 13:52:53 linux kernel: saa7115: set audio: 0x01
Sep 24 13:52:53 linux kernel: saa7127: Setting Encoder Video Standard
Sep 24 13:52:53 linux kernel: saa7127: Set PAL Video Mode
Sep 24 13:52:53 linux kernel: saa7127: Selecting PAL video Standard
Sep 24 13:52:53 linux kernel: ivtv: Initialized WinTV PVR 350, card #0
Sep 24 13:52:53 linux kernel: ivtv: ====================  END INIT IVTV 
====================