[mythtv] If you don't match on PMT....Re-Tune - Possible? -> Better Idea

Matthew Drobnak mdrobnak at optonline.net
Sun Jan 22 05:13:52 UTC 2006


You may be right. I may not have had all the code right
before with the NIT patch. So far, with that + your patch
I seem to be doing great (except now I'm crashing on end of scan...).

More in the morning. :-)

-Matt
On Sat, 21 Jan 2006 22:25:12 -0500, Buechler, Mark R  
<Mark_R_Buechler at bausch.com> wrote:

> I don't see how it would be a factor. If you're looking at the correct
> switch port and you get signal and a correct NIT you should have a lock.  
> The
> key here is the switch.
>
> - Mark.
>
> -----Original Message-----
> From: Endaf Jones [mailto:jonese at zener.com]
> Sent: Saturday, January 21, 2006 6:19 PM
> To: Development of mythtv
> Subject: Re: [mythtv] If you don't match on PMT....Re-Tune - Possible? ->
> Better Idea
>
> On 1/21/06, Matthew Drobnak <mdrobnak at optonline.net> wrote:
>
>> If you check the NIT, There's the network id (already have a patch for
>> this from someone else), but also inside of the NIT is the orbital
> location
>> of the satellite.  Therefore, if one names their video source (or uses  
>> the
>> location directive - how would I enable that for a non-rotor app?)
>> as the same as the location...we could match on that to ensure it's  
>> tuned
>> correctly.
>
> That's fine to LNB's that are in-line with the motor, but some/alot of
> us have more than one LNB and they could be 4.5 degres offset to the
> left or right of the motor position.
>
>
> --
> # Endaf
> _______________________________________________
> mythtv-dev mailing list
> mythtv-dev at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>
>
>
>
>
> EMAIL DISCLAIMER
>
> Please Note: The information contained in this message may be privileged  
> and
> confidential, protected from disclosure, and/or intended only for the  
> use of
> the individual or entity named above. If the reader of this message is  
> not
> the intended recipient, or an employee or agent responsible for  
> delivering
> this message to the intended recipient, you are hereby notified that any
> disclosure, distribution, copying or other dissemination of this
> communication is strictly prohibited. If you received this communication  
> in
> error, please immediately reply to the sender, delete the message and
> destroy all copies of it.
>
> Thank You
>
> _______________________________________________
> mythtv-dev mailing list
> mythtv-dev at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev




More information about the mythtv-dev mailing list