[mythtv] If you don't match on PMT....Re-Tune - Possible? -> Better Idea

Buechler, Mark R Mark_R_Buechler at bausch.com
Sun Jan 22 05:47:27 UTC 2006


Make sure you recompile not just libmythtv but mythbackend and the rest in
programs.

- Mark.

-----Original Message-----
From: Matthew Drobnak [mailto:mdrobnak at optonline.net] 
Sent: Sunday, January 22, 2006 12:14 AM
To: Development of mythtv
Subject: Re: [mythtv] If you don't match on PMT....Re-Tune - Possible? ->
Better Idea

You may be right. I may not have had all the code right
before with the NIT patch. So far, with that + your patch
I seem to be doing great (except now I'm crashing on end of scan...).

More in the morning. :-)

-Matt
On Sat, 21 Jan 2006 22:25:12 -0500, Buechler, Mark R  
<Mark_R_Buechler at bausch.com> wrote:

> I don't see how it would be a factor. If you're looking at the correct
> switch port and you get signal and a correct NIT you should have a lock.  
> The
> key here is the switch.
>
> - Mark.
>
> -----Original Message-----
> From: Endaf Jones [mailto:jonese at zener.com]
> Sent: Saturday, January 21, 2006 6:19 PM
> To: Development of mythtv
> Subject: Re: [mythtv] If you don't match on PMT....Re-Tune - Possible? ->
> Better Idea
>
> On 1/21/06, Matthew Drobnak <mdrobnak at optonline.net> wrote:
>
>> If you check the NIT, There's the network id (already have a patch for
>> this from someone else), but also inside of the NIT is the orbital
> location
>> of the satellite.  Therefore, if one names their video source (or uses  
>> the
>> location directive - how would I enable that for a non-rotor app?)
>> as the same as the location...we could match on that to ensure it's  
>> tuned
>> correctly.
>
> That's fine to LNB's that are in-line with the motor, but some/alot of
> us have more than one LNB and they could be 4.5 degres offset to the
> left or right of the motor position.
>
>
> --
> # Endaf
> _______________________________________________
> mythtv-dev mailing list
> mythtv-dev at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>
>
>
>
>
> EMAIL DISCLAIMER
>
> Please Note: The information contained in this message may be privileged  
> and
> confidential, protected from disclosure, and/or intended only for the  
> use of
> the individual or entity named above. If the reader of this message is  
> not
> the intended recipient, or an employee or agent responsible for  
> delivering
> this message to the intended recipient, you are hereby notified that any
> disclosure, distribution, copying or other dissemination of this
> communication is strictly prohibited. If you received this communication  
> in
> error, please immediately reply to the sender, delete the message and
> destroy all copies of it.
>
> Thank You
>
> _______________________________________________
> mythtv-dev mailing list
> mythtv-dev at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev


_______________________________________________
mythtv-dev mailing list
mythtv-dev at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev





EMAIL DISCLAIMER 

Please Note: The information contained in this message may be privileged and
confidential, protected from disclosure, and/or intended only for the use of
the individual or entity named above. If the reader of this message is not
the intended recipient, or an employee or agent responsible for delivering
this message to the intended recipient, you are hereby notified that any
disclosure, distribution, copying or other dissemination of this
communication is strictly prohibited. If you received this communication in
error, please immediately reply to the sender, delete the message and
destroy all copies of it.

Thank You



More information about the mythtv-dev mailing list