[mythtv-users] ***Spam*** digital radio alarm clock
Hika van den Hoven
hikavdh at gmail.com
Tue Jul 27 10:56:32 UTC 2021
Tuesday, July 27, 2021, 4:21:29 AM, you wrote:
> On Mon, 26 Jul 2021 18:38:13 +0200, you wrote:
>>Until last week, when analog radio disappeared, I used a machine with
>>an analog tuner card as my alarm clock. A simple remote boot script
>>that then tuned and started radio playback.
>>I now am looking for thoughts on how to do this with digital playback.
>>- The machine in my bedroom has no digital tuner card;
>>- It does have mythfrontend;
>>- I have both a hdhomerun and a digital tuner card in the backend and
>> the backend is on 24/7;
>>- However the hdhomerun is connected through a dedicated nic on the
>>- Im still running 0.27 under Gentoo Linux.
>>I see 3 possible scenarios, which all include remote booting the
>>1. Remote start liveTV on the right radio channel;
>>2. Move the frontend machine to the dedicated hdhomerun network and
>> remote tune and connect it to the hdhomerun;
>>3. Do this on the backend machine and stream the audio.
>>Any ideas on scripts or programs?
> You can also allow access to the dedicated nic on the backend by
> setting up routing to it via the backend box. That would allow access
> to the hdhomerun from anywhere on your network. That would require
> that the backend box and its hdhomerun network use static IP addresses
> or manual DHCP addresses, but you are probably doing that already. The
> backend box would need its firewall to allow access, if it has one.
> Then you can just run a routing daemon on both the backend and
> frontend boxes - I use quagga. You would set up quagga's OSPF
> protocols (ospfd for IPv4 and ospf6d for IPv6). You could also use
> the older RIPv2 and RIPng protocols, but OSPF works better. If you
> want Windows boxes or other devices to see the dedicated nic, then you
> would need to set up your router to do RIP or OSPF (if it has that
> ability) and those devices would have to send their traffic to the
> dedicated nic via the router.
> It is also possible to just manually set up routing rules, rather than
> using routing protocols to set up the rules.
Good thought, I have ipv4 routing setup and can on Linux access it
through a browser. For some weird reason not on Windows, neither on a
browser nor with the hdhomerun native windows tools. The latter looks
logical as I can not give an ip address there, so it either only
checks the subnet or uses some other discovery method that does not go
beyond the physical subnet.
I'll have to check and compile the latest linux tools as they are old
and also only present on the backend. However checking it, it looks
like I there can supply an ip address.
I'm gonna try things.
Hika mailto:hikavdh at gmail.com
"Zonder hoop kun je niet leven
Zonder leven is er geen hoop
Het eeuwige dilemma
Zeker als je hoop moet vernietigen om te kunnen overleven!"
De lerende Mens
More information about the mythtv-users