[mythtv-users] Correct setup?
John Pilkington
J.Pilk at tesco.net
Sun Jan 14 00:10:51 UTC 2018
On 13/01/18 22:29, Peter Carlsson wrote:
> On Thu, Jan 11, 2018 at 09:42:50PM +0000, John Pilkington wrote:
>> On 11/01/18 21:05, Peter Carlsson wrote:
>>> On Thu, Jan 11, 2018 at 04:36:14AM +0000, Mark Perkins wrote:
>>>>
>>>>> Have I missed a step in the setup?
>>>>>
>>>>> I am on v29.0.
>>>>>
>>>>> Any help would be appreciated!
>>>>>
>>>>> Best regards,
>>>>> Peter Carlsson
>>>>
>>>> Would need to see the log file of the backend starting. Either check the
>>>> location applicable to your distro of choice or stop the BE and start it in
>>>> a terminal window.
>>>
>>> After a reboot most things seems to work!
>>>
>>> One thing that is still a problem is that my pctv tripleStick 292e
>>> didn't find any HD channels which I had before.
>>>
>>> When I bought the 292e back in 2014 the support for DVB-T2 in mythtv
>>> wasn't fully implemented. I recall I had to manually modify the
>>> dtv_multiplex db table and change the frequency to 730000000 and set
>>> mod_sys to DVB-T2 before scanning.
>>>
>>> Now these values are 554000000 and UNDEFINED. Do I still have to change
>>> those values manually and rescan?
>>>
>>> Best regards,
>>> Peter Carlsson
>>
>> I believe the 292e is fully supported now, but mythtvsetup has changed and
>> releases differ. You should be able to set the frequency and DVB-T2 from
>> the Transport Editor, and maybe do a scan with 'links to other Transports'
>> set.
>>
>> That driver doesn't autoswitch between DVB-T and DVB-T2
>
> Thanks for the reply!
>
> I changed the frequency but it didn't find any HD channels anyway.
>
> How do I perform a scan with 'links to other Transports'? Do you mean I
> should select '--service-type all' to scan not only for TV?
>
> Do I manually have to switch between DVB-T and DVB-T2?
I'm sorry it wasn't clear. I don't have a 292e, but it seems that you
have found the device and have set up working Video sources and Input
connections. I suppose it may be detectable as two devices, one for
DVB-T and one for DVB-T2, and perhaps you have enabled only the first.
I would expect the default Full Scan to work, although it may find
signals from several transmitters and lead to a need for editing. My
suggestion about 'links for other Transports' can avoid that, but
shouldn't be essential. It's found in the Transport Editor after
several applications of the > > > key - and returns with <.
I record a lot of radio programmes, but you may only want tv.
Once you have it set up I don't think you have to switch manually.
HTH
John
More information about the mythtv-users
mailing list