[mythtv-users] DVB-T2 HD in Germany

[Tino Mettler]

Hi,

I try to get DVB-T2 HD working with 0.28. I was able to scan for
channels. However, they seem to be detected as non-TV channels.
Watching such a channel in MythTV results in audio but no video.

I also used dvbv5-scan and the video PID was not detected correctly,
but some "PID_24" is put into the resulting channels.conf instead. 
After replacing it with "VIDEO_PID" I can tune into one of the FTA
channels using dvbv5-zap and watch it. So at least my hardware seems to
work fine for DVB-T2 HD.

Could it be that MythTV stumbles over the same thing? Here is some
debug output when starting to watch:

2017-02-21 22:15:12.578027 I  Created PMT 
Program Map Section
 PSIP tableID(0x2) length(87) extension(0x1)
      version(1) current(1) section(0) last_section(0)
      pnum(1) pid(0x560) pcrpid(561)
  Stream #0 pid(0x561) type(0x24 video-h265)
    
  Stream #1 pid(0x562) type(0x87 audio-eac3)
    E-AC-3 Descriptor (0x7a) length(8). Dumping
      000  f7 c2 10 00 00 00 00 00                           |........|
    ISO-639 Language: code(deu) canonical(ger) eng(German)
    Stream Identifier Descriptor (0x52): ComponentTag=0x2
  Stream #2 pid(0x566) type(0x06 private-data)
    Stream Identifier Descriptor (0x52): ComponentTag=0x3
    Teletext Descriptor: 1 pages     type(1) mag(1) page(00) lang(deu)
  Stream #3 pid(0x567) type(0x05 private-sec)
    Application Signalling Descriptor (0x6f) length(3). Dumping
      000  00 10 e0                                          |...|
    Stream Identifier Descriptor (0x52): ComponentTag=0x8

The frontend reports "Stream #0, has id 0x562 codec id E-AC3" and "Stream #1, has id 0x566 codec id
DVB_TELETEXT", so it looks like the real stream #0 which contains the
video is ignored.

Any other ideas what else I could try? Are the PIDs stored in the DB
somewhere? 

Regards,
Tino