[mythtv-users] Rescan of video library broken in the last week?
Paul Wootton
pwootton at gmail.com
Fri Jul 4 20:14:55 UTC 2014
On 4 Jul 2014, at 20:37, Jean-Yves Avenard <jyavenard at gmail.com> wrote:
> On 5 July 2014 04:21, Paul Wootton <pwootton at gmail.com> wrote:
>
>> The mbe is headless, but I fired up mythfrontend using a ssh -X session, and the all the sbe content was library was removed from the video library. :-( Because I started this from the command line I can also see lots of messages that look like this
>>
>> --- snip ---
>> 2014-07-04 19:15:44.984020 I Removing file SG(boris) :p-s/Peter_Gabriel_-_Live_In_Athens_(2013).mkv:
>> 2014-07-04 19:15:44.984032 I Removing file SG(bob) :Peter_Gabriel:_Play_(2004)_[22-Modern_Love].mkv:
>> 2014-07-04 19:15:44.984042 I Removing file SG(bob) :Peter_Gabriel:_Play_(2004)_[21-Solsbury_Hill].mkv:
>> 2014-07-04 19:15:44.984054 I Removing file SG(bob) :Peter_Gabriel:_Play_(2004)_[20-Zaar].mkv:
>> 2014-07-04 19:15:44.984063 I Removing file SG(bob) :Peter_Gabriel:_Play_(2004)_[19-The_Drop].mkv:
>> 2014-07-04 19:15:44.984076 I Removing file SG(bob) :Peter_Gabriel:_Play_(2004)_[18-Steam].mkv:
>> 2014-07-04 19:15:44.984090 I Removing file SG(bob) :Peter_Gabriel:_Play_(2004)_[17-Shock_the_Monkey].mkv:
>> 2014-07-04 19:15:44.984099 I Removing file SG(bob) :Peter_Gabriel:_Play_(2004)_[16-Shaking_the_Tree].mkv:
>> --- snip ---
>
> Are the SBE running at this time?
Yes. I can watch things in the library, and they're marked as watched when they finish.
> What do you have in mythtv-setup in General as network addresses ?
boswell is the mbe, bort boris and bob are the sbes, ace and king are the fe's...
boswell: local ipv4 backend address 10.100.101.27 ; no ipv6 address ; mbe address 10.100.101.27
bort: local ipv4 backend address 10.100.101.19 ; local ipv6 address ::1 ; mbe address 10.100.101.27
bob: local ipv4 backend address 10.100.101.8 ; no ipv6 address ; mbe address 10.100.101.27
boris: local ipv4 backend address 10.100.101.4 ; no ipv6 ; mbe address 10.100.101.27
ace: (no mythtv-setup; only frontend installed); ip addr 10.100.101.30
king: (no mythtv-setup; only frontend installed); ip addr 10.100.101.31)
mythtv version(s) currently installed...
boswell: v0.27.2-14-g40f8852
bort: v0.27.2-14-g40f8852
bob: v0.27.2-14-g40f8852
boris: v0.27.2-14-g40f8852
ace: v0.27.2-14-g40f8852
king: v0.27.1-16-gaa822f5
For the sake of completeness I should mention that all the sbe's are 'tunerless' - there aren;'t any hardware tuners attached, but they each have a 'file:' capture card installed.
> Can you upgrade to 0.27.3 and see if you're still have the issue?
I built it on the mbe this afternoon; I just need to work out a relatively painless way of installing it on all the machines. I might wait a few days for the mythbuntu 27.3 though!
>
> Ideally, open a ticket on code.mythtv.org and provide the log of the
> MBE, SBE, frontend all started with -v file,network --loglevel=debug
>
> try to limit what you are doing to just startup, scan.
>
> because those options are very verbose and make looking for the needle very hard
> Thanks
> JY
If I'm not running 27.3 by (say) next weekend I'll do this.
Thanks
-- Paul --
More information about the mythtv-users
mailing list