[mythtv-users] Not waking up

Daryl McDonald darylangela at gmail.com
Sun Aug 10 22:20:20 UTC 2014


On Sun, Aug 10, 2014 at 4:15 PM, Daryl McDonald <darylangela at gmail.com>
wrote:

> Greetings mythizens, recently I've noticed my box is not waking up for
> scheduled recordings a it has in the past, probably due to all the cloning
> and re installing trying to upgrade to 14.04. I've re installed a
> wakeup-test.sh suggested by Bill Meek, properly this time now that my
> comprehension has expanded some and come up with the following result:
> daryl at daryl-A780L3C:~$ sudo /wakeup-test.sh
> [sudo] password for daryl:
> rtc_time : 15:46:38
> rtc_date : 2014-08-10
> alrm_time : 19:47:38
> alrm_date : 2014-08-10
> alarm_IRQ : yes
> alrm_pending : no
> update IRQ enabled : no
> periodic IRQ enabled : no
> periodic IRQ frequency : 1024
> max user IRQ frequency : 64
> 24hr : yes
> periodic_IRQ : no
> update_IRQ : no
> HPET_emulated : no
> BCD : yes
> DST_enable : no
> periodic_freq : 1024
> batt_status : dead
> the script is designed to wake up one minute in the future, seeing the
> four hour and one minute difference, I suspected my bios had reverted to
> UTC from RTC, since I've abandoned dual boot. I therefore re inserted the
> "setwakeup.sh" for UTC and put the previous script on the sidelines, ran a
> quick test, which failed, then upon closer examination I could see the
> sidelined script should have handled either UTC or RTC.
> I'm running 0.27.3 inside a 12.04 Ubuntu desktop environment. Any
> suggestions on what to try next to get it to wake by itself would be
> greatly appreciated. TIA Daryl
>

After toggling the UTC option back to "yes" (assume bios is set to UTC
recommended) in "/etc/default/rcS" the system did try to wakeup, but needed
manual intervention. Used to be once in a while and now almost every time,
after the bios screen I get a message like this is not a bootable disk
insert floppy and press any key to continue. I scrambled to find a live CD
the first time but now realize that hitting enter boots up, and later there
is a message "mount all disconnected from Plymouth" that may not be
verbatim, it goes pretty quick and the system is up. does anyone have
experience with this behaviour, or knowledge of how to correct it?
 Daryl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20140810/053d5833/attachment.html>


More information about the mythtv-users mailing list