[mythtv-users] HVR-2250 - tuner unavailable
Dan Littlejohn
dan.littlejohn at gmail.com
Sat Apr 14 03:17:44 UTC 2012
On Fri, Apr 13, 2012 at 8:55 PM, Dan Littlejohn <dan.littlejohn at gmail.com>wrote:
>
>
> On Thu, Apr 12, 2012 at 7:23 AM, Greg <greg12866 at nycap.rr.com> wrote:
>
>> On 04/11/2012 11:02 PM, Dan Littlejohn wrote:
>>
>>> Having trouble with the analog part of a new HVR-2250 card. Using
>>> Gentoo and kernel 3.2.1 and it looks like the card is loading ok
>>> (below). I downloaded the firmware and put it in /lib/firmware, not
>>> sure if that is still needed. There are /dev/video0 and /dev/video1
>>> entries and I added it using the MPEG-2 in mythtv-setup, but the card
>>> shows up on myth as "unavailable" Not sure what I need to look for at
>>> this point. I have read what I can find, does anyone have any tips on
>>> getting this to work?
>>>
>>> Dan
>>>
>>> saa7164 driver loaded
>>> saa7164 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>>> CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250
>>> [card=7,autodetected]
>>> saa7164[0]/0: found at 0000:02:00.0, rev: 129, irq: 16, latency: 0,
>>> mmio: 0xfb800000
>>> saa7164 0000:02:00.0: setting latency timer to 64
>>> saa7164_downloadfirmware() no first image
>>> saa7164_downloadfirmware() Waiting for firmware upload
>>> (NXP7164-2010-03-10.1.fw)
>>> saa7164_downloadfirmware() firmware read 4019072 bytes.
>>> saa7164_downloadfirmware() firmware loaded.
>>> saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
>>> saa7164_downloadfirmware() FirmwareSize = 0x1fd6
>>> saa7164_downloadfirmware() BSLSize = 0x0
>>> saa7164_downloadfirmware() Reserved = 0x0
>>> saa7164_downloadfirmware() Version = 0x1661c00
>>> saa7164_downloadimage() Image downloaded, booting...
>>> saa7164_downloadimage() Image booted successfully.
>>> saa7164_downloadimage() Image downloaded, booting...
>>> saa7164_downloadimage() Image booted successfully.
>>> saa7164[0]: Hauppauge eeprom: model=88061
>>> DVB: registering new adapter (saa7164)
>>> DVB: registering new adapter (saa7164)
>>> saa7164[0]: registered device video0 [mpeg]
>>> saa7164[0]: registered device video1 [mpeg]
>>> saa7164[0]: registered device vbi0 [vbi]
>>> saa7164[0]: registered device vbi1 [vbi]
>>>
>>>
>>> ______________________________**_________________
>>> mythtv-users mailing list
>>> mythtv-users at mythtv.org
>>> http://www.mythtv.org/mailman/**listinfo/mythtv-users<http://www.mythtv.org/mailman/listinfo/mythtv-users>
>>>
>>
>>
>> I had the same problem,it was suggested that I read over this post..
>>
>> http://ubuntuforums.org/**showthread.php?t=1567490&page=**10<http://ubuntuforums.org/showthread.php?t=1567490&page=10>
>>
>> I followed post #99...Thanks to Craig Cook for that...
>>
>>
>> ______________________________**_________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://www.mythtv.org/mailman/**listinfo/mythtv-users<http://www.mythtv.org/mailman/listinfo/mythtv-users>
>>
>
> minor progress on this. If I use /dev/video1 and s-video I get a
> picture,but no sound. Am using the 3.5 jack and verified it works with
> other devices, but it does not work when recording with myth. If I cat
> /dev/video1 > /tmp/test.mpg the recording is created, but does not have any
> sound. I have looked high and low for a solution and post #99 does not
> help any on this. Anyone have experience with this problem or a hint on
> what I should be looking into?
>
Well, I finally figured it out. I was trying to use the adapter card
s-video with the 3.5 jack. I could never get it to work. I finally found
a pig tail s-video / audio adapter in the HVR-2250 box and found that if I
used that I could get video and audio. So basically, don't use the adapter
card. Still having a problem with having to restart myth several time to
get the card to be usable. I will post back if I figure that out.
Dan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20120413/88c2727e/attachment.html>
More information about the mythtv-users
mailing list