[mythtv-users] Anyone got an OrigenAE S10V Case

[Roy Lofthouse]

2009/10/6 Timothy Bish <tabish121 at gmail.com>:
> On Tue, 2009-10-06 at 16:14 +0100, Roy Lofthouse wrote:
>> If so, are you able to power the thing up from the remote?
>>
>> It's supposed to be able to power up via a cold state but mine isn't
>> doing anything when I try via the remote.
>>
>> The display is working when the PC is off and the power button is lit
>> orange so it's got power.
>>
>> I mailed Origen over a week ago, but no reply as of yet :(
>
> I've powered mine off and on from the remote before, I don't do it
> currently but I know it works.  In order to get it working you need to
> teach the IRTans software what the power off and on signals are from the
> remote.  There's no way to setup the on/off commands from the ascii
> client as far as I know, I used the Windows GUI client and entered the
> learned command names from my remote configuration into the entries on
> the Device status page in that app, this updates the firmware on the
> VF210 with the IR codes needed to handle on/off.  Then all you need to
> do is ensure that you've hooked up the cabling from the VF210 correctly
> so it can act as the on/off button.
>
> Regards
> Tim.
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>

Thanks for the info Tim,

Looks like I need to install windows on an old drive as you can't
upgrade the firmware without it either :(

As for the cabling, that's already in place.

Thanks again.