[mythtv-users] Zotac IonITX suspend issues.

[Marc Tousignant]

This is my first time attempting suspend so I might be doing it wrong.
I have an IonITX-C-U Ver:01 PCB. This is one of the new ones that has the
JP3 jumper for 5v on USB which is supposed to enable wake on USB.
The Jumper default is 1-2 (5vDual) with 2-3 (5v) as the non default.
I verified suspend to ram works on my machine before enabling the USB ports
in the system to allow wakeup.
Once I enabled the USB ports the system wakes instantly after suspend.
Originally I thought this was due to my Streamzap remote as I found several
articles online stating that the Streamzap does not support suspend.
I picked up a new MCE remote off of ebay and hooked it up. Double checked
suspend without USB, worked, enabled USB and again the system woke after
suspend.
So as my final test I borrowed a USB mouse from another machine, the only
device normally connected is the IR Receiver, hooked that up and tried
suspend to ram again with the mouse being the only device connected via USB
and it was upside down with no one touching it. Again instant wakeup.
So, from this I have determined that there is an issue with my
configuration. I left the default setting on the jumper, should I change to
5v only? What other options do I have to troubleshoot this?

Marc