[mythtv-users] DViCO Fusion HDTV5 Lite Analog Audio Problem

[Bruce Taber]

Anybody have analog sound working with the Fusion Lite card? I have the
digital side working on a channel and sound plays fine to a frontend
when tuned on the digital channel. But have not been successful getting
the analog side to output any sound. Using .20-fixes (latest update) on
kernel 2.6.18-1.2200.fc5. The input source for this is from cable. This
card is actually running in a slave backend but I don't see where that
would be a factor.

The settings in mythtv-setup-> 
General: 
Type: NTSC   - This allows analog to tune better, no affect on digital 

Capture Card Setup:
Card type: DVB DTV capture card (v3.x) 
DVB Card Number: 0 
(detected not entered, not sure of the subtype as it is cut off) 
Frontend ID: DViCO v2 or Air2PC v3 or pcHDTV HD-5500 Subtype ... 

Analog Options:
Video device: /dev/video 
(detected not entered) 
Probed info: BT878 video (DViCO FusionHDTV 5 [bttv]) 
VBI device: /dev/vbi 
Audio device: /dev/dsp 
Audio sampling rate limit: (None) (unchecked) Do not adjust volume 
Default input: Television 

Input connections: 
[DVB]:0] (DVBInput) -> DigitalSpecial 
->[V4L:/dev/video0](Television)-> Analog 
->[V4L:/dev/video0](Composite1)-> (None) 
->[V4L:/dev/video0](S-Video)-> (None)

I'm wondering if there are some additional settings that need to be made
in loading the drivers as the Audio device: can't be changed to anything
else except (none).

I've tried using the audio plug to connect the card to the sound on the
motherboard. Doesn't seem to matter having it in or out. Digital side
has audio either way. Aplay plays sound out the sound card in the
machine okay.

If anybody has further insight into this or has some other setting
they're using it would be appreciated.

Thanks,

Bruce