[mythtv-users] DVICO Fusion HDTV PCI and FC5 / Mythtv Setup
Nathan
ndc_82 at hotmail.com
Tue Nov 7 14:21:36 UTC 2006
Hi Phil, basically the problem im having with the compro videomate dvb-t 300
is i can watch tv with it through kaffeine but mythtv wont have a bar of it.
It will pick it up as a device but wont pick up any channels no matter what.
The dvico im still trying to setup properly so i can test it, it does appear
in lsmod and dmesg i can provide those outputs of those files if necessary
Nathan
----- Original Message -----
From: "Phil Foxton" <phil at thefoxtons.org.uk>
To: "Discussion about mythtv" <mythtv-users at mythtv.org>
Sent: Wednesday, November 08, 2006 12:13 AM
Subject: Re: [mythtv-users] DVICO Fusion HDTV PCI and FC5 / Mythtv Setup
I have both of these cards working perfectly under FC5 and mythtv, what
issues
are you coming up against Nathan?
Phil
--
Phil Foxton RHCE
---------- Original Message -----------
From: Bruce Taber <b.taber at comcast.net>
To: Discussion about mythtv <mythtv-users at mythtv.org>
Sent: Tue, 07 Nov 2006 09:06:06 -0500
Subject: Re: [mythtv-users] DVICO Fusion HDTV PCI and FC5 / Mythtv Setup
> On Tue, 2006-11-07 at 09:38 +1000, Nathan wrote:
> > Hey guys basically what i want to do is setup my new Dvico card with
> > mythtv. Now i allready have another card setup which ISNT working with
> > mythtv its a Compro Videomate dvb-t 300. But anyhow what is the
> > correct process to setup the Dvico as when i installed it in the pc
> > turned it on nothing happened.
> >
> > The only sign of FC5 seeing it is that it comes up in dmesg but not as
> > a registered device.
> >
> > Any help would be great
> >
>
> You need to load the module:
> http://www.mythtv.org/wiki/index.php/DViCO_FusionHDTV_DVB-T_Lite
>
> This is a way to figure out the channels for your locality:
> http://www.mythtv.org/wiki/index.php/DVB_search
>
> The mythtv-setup from here will get the card recognized:
> http://www.mythtv.org/wiki/index.php/DViCO_FusionHDTV5_Gold
>
> Then in mythtv-setup you will need to do a full scan and likely a
> full scan of existing transports. I'm not quite sure of the specific
> steps that need to be performed here. I've gotten one channel to
> work reliably but have problems with others. I think this part is
> highly dependent on the actual source.
>
> Bruce
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
------- End of Original Message -------
_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
More information about the mythtv-users
mailing list