[mythtv-users] DVICO Fusion HDTV PCI and FC5 / Mythtv Setup

[Phil Foxton]

Have you made sure that /dev/dvb is owned by mythtv?

can you do a 
dmesg | grep -A5 -i compro
 and reply with the output?

Thanks

Phil

--
Phil Foxton RHCE


---------- Original Message -----------
From: "Nathan" <ndc_82 at hotmail.com>
To: "Discussion about mythtv" <mythtv-users at mythtv.org>
Sent: Wed, 8 Nov 2006 00:21:36 +1000
Subject: Re: [mythtv-users] DVICO Fusion HDTV PCI and FC5 / Mythtv Setup

> Hi Phil, basically the problem im having with the compro videomate 
> dvb-t 300 is i can watch tv with it through kaffeine but mythtv wont 
> have a bar of it. It will pick it up as a device but wont pick up 
> any channels no matter what.
> 
> The dvico im still trying to setup properly so i can test it, it 
> does appear in lsmod and dmesg i can provide those outputs of those 
> files if necessary
> 
> Nathan
> 
> ----- Original Message ----- 
> From: "Phil Foxton" <phil at thefoxtons.org.uk>
> To: "Discussion about mythtv" <mythtv-users at mythtv.org>
> Sent: Wednesday, November 08, 2006 12:13 AM
> Subject: Re: [mythtv-users] DVICO Fusion HDTV PCI and FC5 / Mythtv Setup
> 
> I have both of these cards working perfectly under FC5 and mythtv, 
> what issues are you coming up against Nathan?
> 
> Phil
> 
> --
> Phil Foxton RHCE
> 
> ---------- Original Message -----------
> From: Bruce Taber <b.taber at comcast.net>
> To: Discussion about mythtv <mythtv-users at mythtv.org>
> Sent: Tue, 07 Nov 2006 09:06:06 -0500
> Subject: Re: [mythtv-users] DVICO Fusion HDTV PCI and FC5 / Mythtv Setup
> 
> > On Tue, 2006-11-07 at 09:38 +1000, Nathan wrote:
> > > Hey guys basically what i want to do is setup my new Dvico card with
> > > mythtv. Now i allready have another card setup which ISNT working with
> > > mythtv its a Compro Videomate dvb-t 300. But anyhow what is the
> > > correct process to setup the Dvico as when i installed it in the pc
> > > turned it on nothing happened.
> > >
> > > The only sign of FC5 seeing it is that it comes up in dmesg but not as
> > > a registered device.
> > >
> > > Any help would be great
> > >
> >
> > You need to load the module:
> > http://www.mythtv.org/wiki/index.php/DViCO_FusionHDTV_DVB-T_Lite
> >
> > This is a way to figure out the channels for your locality:
> > http://www.mythtv.org/wiki/index.php/DVB_search
> >
> > The mythtv-setup from here will get the card recognized:
> > http://www.mythtv.org/wiki/index.php/DViCO_FusionHDTV5_Gold
> >
> > Then in mythtv-setup you will need to do a full scan and likely a
> > full scan of existing transports. I'm not quite sure of the specific
> > steps that need to be performed here. I've gotten one channel to
> > work reliably but have problems with others. I think this part is
> > highly dependent on the actual source.
> >
> > Bruce
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> ------- End of Original Message -------
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
------- End of Original Message -------