[mythtv-users] Problems scanning channels with DVB-T in northern Germany with 0.19

[Dirk Aust]

Hello all,
I have difficulties scanning channels with a DVB-T card in Germany, the HW and 
driver must be ok, I get all the channels sopposed to be there when using 
dvbscan from linuxtv,org

When I use mythtv-setup, I can see from debugging output that there is a look, 
it sees the services available on the channel, but it complains about a 
missing table and doesn't find any channel, it worked also with 0.18.1

Anybody an idea or even anybody succesfully tuning DVB-T in northern Germany 
with 0.19?


This is the debugging output of mythtv-setup:

2006-03-19 15:14:30.179 DVB#0 DVBChannel::Tune: Frequency tuning successful.
2006-03-19 15:14:30.179 DVB#0 Setting mplexid = 13
2006-03-19 15:14:30.179 FillPMap(str dvb)
2006-03-19 15:14:30.179 FillPMap(SIS dvb)
2006-03-19 15:14:30.180 SIParser: Requesting PAT
2006-03-19 15:14:30.180 SM(0)::Start: begin
2006-03-19 15:14:30.187 SM(0)::Start: end
2006-03-19 15:14:30.403 DVBSM(0)::UpdateValues: Signal Locked
2006-03-19 15:14:31.174 SIParser: Table[0]->RequirePIDs() == true
2006-03-19 15:14:31.175 DVBSIParser: Adding PID 0x   0 Filter 0x 0 Mask 0xff 
Buffer 40960
2006-03-19 15:14:31.176 SIParser: Table[2]->RequirePIDs() == true
2006-03-19 15:14:31.176 DVBSIParser: Adding PID 0x1ffb Filter 0xff Mask 0x 0 
Buffer 40960
2006-03-19 15:14:31.177 SIParser: Table[3]->RequirePIDs() == true
2006-03-19 15:14:31.177 DVBSIParser: Adding PID 0x1ffb Filter 0xff Mask 0x 0 
Buffer 40960
2006-03-19 15:14:31.177 SIParser: Table[6]->RequirePIDs() == true
2006-03-19 15:14:31.178 DVBSIParser: Adding PID 0x  10 Filter 0x40 Mask 0xff 
Buffer 40960
2006-03-19 15:14:31.304 SIParser: PAT Version = 6
2006-03-19 15:14:31.304 SIParser: Tuned to TransportID: 514
2006-03-19 15:14:31.305 SIParser: PMT pn(514) on PID 0x220
2006-03-19 15:14:31.305 SIParser: PMT pn(515) on PID 0x230
2006-03-19 15:14:31.306 SIParser: PMT pn(517) on PID 0x250
2006-03-19 15:14:31.306 SIParser: Services on this Transport: 514 515 517
2006-03-19 15:14:31.306 SIParser: Table[0]->Complete() == true
2006-03-19 15:14:39.195 SIScan(0): Timeout Scanning Multiplex #13 -- no tables
2006-03-19 15:14:39.195 DVBSM(0)::Stop: begin
2006-03-19 15:14:39.195 SM(0)::Stop: begin
2006-03-19 15:14:39.227 SM(0)::Stop: end
2006-03-19 15:14:39.227 DVBSM(0)::Stop: end
2006-03-19 15:14:39.229 SIScan(0): Stopping SIScanner
2006-03-19 15:14:39.235 DVBSIParser: Stopping DVB Section Reader
2006-03-19 15:14:39.285 DVBSIParser: DVB Section Reader thread stopped
2006-03-19 15:14:39.287 DVBSM(0)::Stop: begin
2006-03-19 15:14:39.287 SM(0)::Stop: begin
2006-03-19 15:14:39.287 SM(0)::Stop: end
2006-03-19 15:14:39.287 DVBSM(0)::Stop: end
2006-03-19 15:14:39.288 SIScan(0): SIScanner Stopped
2006-03-19 15:14:39.288 DVBSM(0)::Stop: begin
2006-03-19 15:14:39.288 SM(0)::Stop: begin
2006-03-19 15:14:39.288 SM(0)::Stop: end
2006-03-19 15:14:39.288 DVBSM(0)::Stop: end
2006-03-19 15:14:39.289 SM(0)::Stop: begin
2006-03-19 15:14:39.289 SM(0)::Stop: end
2006-03-19 15:14:39.289 DVB#0 Closing DVB channel