[mythtv-users] atrpm's ivtv broken?

[Brady]

Is the ivtv release on atrpm's broken? It didn't install
msp3400_ivtv.ko. The video received by the tuner is also skewed down
and to the left (I only get part of th screen).

I just updated to mythtv 0.19 and I have to say I like it a bunch.. it
seems faster and there are lots of little changes that are nice =)

Anyways, during the upgrade I accidental upgraded my nvidia driver
along with everything else (always watch yum.. it likes to break
things!) Anyways.. because the driver for 2.6.14 was no longer in the
repository I was forced to upgrade my kernel, lirc, and ivtv.. lirc
and nvidia worked but ivtv is now broken...

If you have any suggestions please let me know! =) Im lost as to
fixing this and atrpm's no longer has the rpm's that I know worked =/

dmesg output:
ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.4.3 (tagged release) loading
ivtv:  Linux version: 2.6.15-1.1833_FC4smp SMP 686 REGPARM 4KSTACKS gcc-4.0
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 250 card (cx23416 based)
ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 177
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
tveeprom: ivtv version
tveeprom: Hauppauge: model = 26032, rev = C199, serial# = 8749438
tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = CX25841 (type = 23)
tveeprom: decoder processor = CX25841 (type = 1c)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
ivtv0 warning: i2c client addr: 0x21 not found for command 0x8004646b!
ivtv0: Failed to load module msp3400
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02040024
ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011
or 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x21 not found for command 0xc0045627!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40086d11!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045613!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x402c5639!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045612!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv0: Initialized WinTV PVR 250, card #0
ivtv:  ======================  NEXT CARD  ======================
ivtv1: Autodetected WinTV PVR 150 card (cx23416 based)
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 193
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]
tveeprom: ivtv version
tveeprom: Hauppauge: model = 26552, rev = C268, serial# = 8754018
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
tda9887 2-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43]
cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44]
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b]
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02040024
ivtv1 warning: Encoder Firmware can be buggy, use version 0x02040011
or 0x02050032.
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv1: Create encoder radio stream
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #1
ivtv1: Initialized WinTV PVR 150, card #1
ivtv:  ====================  END INIT IVTV  ====================

Card 1 is a PVR 150 MCE and the other is a plain old PVR 150.


rpms installed:
ivtv-firmware-enc-2.04.024-8.at
ivtv-kmdl-2.6.15-1.1833_FC4-0.4.3-103.rhfc4.at
ivtv-kmdl-2.6.15-1.1833_FC4smp-0.4.3-103.rhfc4.at
ivtv-firmware-dec-2.02.023-8.at
ivtv-0.4.3-103.rhfc4.at
lirc-devices-0.7.0-1.rhfc4.at
lirc-kmdl-2.6.15-1.1833_FC4smp-0.8.0-55.rhfc4.at
lirc-lib-0.8.0-55.rhfc4.at
lirc-0.8.0-55.rhfc4.at