[mythtv-users] Australian channel scan
frosts1 at hotkey.net.au
frosts1 at hotkey.net.au
Tue Oct 4 23:01:39 UTC 2005
Quoting Jim Householder <nofixed at westnet.com.au>:
> Phill Edwards wrote:
> >>I'm making some progress with mythtv. Using the excellent guidance at
> >>http://wilsonet.com/mythtv/fcmyth.php I have 0.18.1-114 running on FC4.
> >>
> >>Hardware: V-Stream DTV DVB-T, 2.4GHz P4, 1GB ram
> >>
> >>I can watch the composite input from a VCR ok, but no digital yet.
> >>
> >>I adjusted the permissions on /dev/dvb so the card can be seen and
> >>identified ok, and the channel scan button is now active in the channel
> >>editor.
> >>
> >>I'm stuck here. I have no idea how to set up the scan parameters. I
> >>suspect 'auto' is sufficient for most. All I get is 'no lock'. I've
> >>tried 571625000 for channel 34 (SBS in my area) and 520000000 (start of
> >>the UHF band).
> >>
> >>What frequency should I use?
> >
> >
> > I think it depends on where you are and what transmitters you are
> > near. Have a look at http://www.mythtv.info/moin.cgi/DigitalTvHowto
> > for help. I'm in Sydney in view of the Manly antennae so if that helps
> > I could tell you my frequencies.
> >
> > BTW - I use the same cards as you. Would you mind sharing how you got
> > them to take input from a VCR as that's something I want to do as
> > well.
> >
> That's a bit of a problem now... I have the RCA video out connected to
> the composite input of the card, and the audio directly to the line-in
> of my sound card. Works fine now with tvtime, but I can no longer
> select the composite input with mythtv. Don't know how I managed the
> first time.
>
> The tzap pointer has helped a lot. tzap showed me the card was working,
> and data from the channel.conf* files got me through the channel scan -
> sort of. I get SBS 1, 2, and EPG, but I need to use the browse function
> to switch between them. The arrow keys don't work.
>
> After the first scan I got one ABC channel and 3 SBS. I could only
> watch the ABC. At that point I had not tried the browse bit yet, so SBS
> was probably there. Then I stuffed up and started over. Now I get the
> SBS channels but cannot get a lock on the ABC.
>
> I need data for the Mt. Lennard transmitters near Bunbury, WA.
>
> Is there a way to import dvb-utils' channel.conf into mythtv?
>
> TIA
> Jim
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
The place to find info on transmitters in australia is www.dba.org.au
Click on reception & installation->reception locator
More information about the mythtv-users
mailing list