[mythtv-users] Re: REPOST: PVR-500 dmseg - PLEASE NEED HELP DEBUGGING

Derek Meek thekazan at gmail.com
Mon Oct 3 17:12:44 UTC 2005


the gentoo PVR-500 wiki may help

http://gentoo-wiki.com/HARDWARE_PVR_500_Setup

On 10/3/05, Folashade Adeyosoye <shardayyy at gmail.com> wrote:
> Please can you go thru my dmesg, my card does not seem to work.
>
>
>
> I followed these instructions.
>
> PVR-500
>
> Using knoppmyth R5A16 and ivtv: version 0.3.9
>
>
>
> http://www.bitbenderforums.com/~ralpha6/knoppmyth/knoppmythtv.htm
>
>
>
>
>
>
>
> Thanks
>
>
>
>
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.3.9 (development svn snapshot revision ) loading
> ivtv: Linux version: 2.6.11.9-chw-2 SMP preempt 586 gcc-3.3
> ivtv: In case of problems please include the debug info
> ivtv: between the START INIT IVTV and END INIT IVTV lines when
> ivtv: mailing the ivtv-devel mailinglist.
> ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
> ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 10 (level, low) -> IRQ 10
> ivtv: Unreasonably low latency timer, setting to 64 (was 32)
> ivtv: i2c attach to card #0 ok [client=tveeprom, addr=50]
> tveeprom: Hauppauge: model = 23552, rev = D592, serial# = 2995024
> tveeprom: tuner = <unknown> (idx = 101, type = -885711276)
> tveeprom: tuner fmt = <none> (eeprom = 0x00, v4l2 = 0x00000000)
> tveeprom: audio_processor = MSP3410D (type = 5)
> ivtv: This is the first unit of a PVR500
> ivtv: No tuner detected, default to NTSC
> ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60]
> tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> cx25840: Unknown parameter `i2c_enable'
> ivtv: Failed to load module cx25840
> ivtv warning: i2c client addr: 0x44 not found for command 0x400464cb!
> ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b]
> tda9885/6/7: chip found @ 0x86
> ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]
> ivtv: loading /lib/modules/ivtv-fw-enc.bin
> ivtv: Encoder revision: 0x02040011
> ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
> ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
> ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
> ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
> total)
> ivtv: Create encoder radio stream
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046403!
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046404!
> ivtv warning: i2c client addr: 0x44 not found for command 0x4004646e!
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046403!
> ivtv warning: i2c client addr: 0x44 not found for command 0x80287610!
> ivtv warning: i2c client addr: 0x44 not found for command 0x40287611!
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046406!
> tuner 0-0060: tuner type not set
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046406!
> eth0: no IPv6 routers present
> ivtv warning: i2c client addr: 0x44 not found for command 0x80287610!
> ivtv warning: i2c client addr: 0x44 not found for command 0x40287611!
> ivtv: Initialized WinTV PVR 500 (unit #1), card #0
> ivtv: ======================  NEXT CARD  ======================
> ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
> PCI: setting IRQ 5 as level-triggered
> ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 5 (level, low) -> IRQ 5
> ivtv: Unreasonably low latency timer, setting to 64 (was 32)
> ivtv: i2c attach to card #1 ok [client=tveeprom, addr=50]
> ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61]
> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
> ivtv: i2c attach to card #1 ok [client=wm8775, addr=1b]
> tda9885/6/7: chip found @ 0x86
> ivtv: i2c attach to card #1 ok [client=tda9887, addr=43]
> tveeprom: Hauppauge: model = 23552, rev = D592, serial# = 2995024
> tveeprom: tuner = <unknown> (idx = 101, type = -885711276)
> tveeprom: tuner fmt = <none> (eeprom = 0x00, v4l2 = 0x00000000)
> tveeprom: audio_processor = MSP3410D (type = 5)
> ivtv: This is the second unit of a PVR500
> ivtv: Correcting tveeprom data: no radio present on second unit
> cx25840: Unknown parameter `i2c_enable'
> ivtv: Failed to load module cx25840
> ivtv warning: i2c client addr: 0x44 not found for command 0x400464cb!
> ivtv: loading /lib/modules/ivtv-fw-enc.bin
> ivtv: Encoder revision: 0x02040011
> ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
> ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
> ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
> ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
> total)
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046403!
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046404!
> ivtv warning: i2c client addr: 0x44 not found for command 0x4004646e!
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046403!
> ivtv warning: i2c client addr: 0x44 not found for command 0x80287610!
> ivtv warning: i2c client addr: 0x44 not found for command 0x40287611!
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046406!
> tuner 1-0061: tuner type not set
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046406!
> ivtv warning: i2c client addr: 0x44 not found for command 0x80287610!
> ivtv warning: i2c client addr: 0x44 not found for command 0x40287611!
> ivtv: Initialized WinTV PVR 500 (unit #2), card #1
> ivtv: ====================  END INIT IVTV  ====================
> ivtv warning: i2c client addr: 0x44 not found for command 0x40206467!
> tuner 0-0060: tuner type not set
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046403!
> ivtv warning: i2c client addr: 0x44 not found for command 0x40206467!
> tuner 1-0061: tuner type not set
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046403!
> ts: Compaq touchscreen protocol output
> input: PC Speaker
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
> shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
> shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
> shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046406!
> tuner 1-0061: tuner type not set
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046406!
> .
> .
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046406!
> tuner 0-0060: tuner type not set
> ivtv warning: i2c client addr: 0x44 not found for command 0x40046406!
> .
> .
> .
> ivtv warning: i2c client addr: 0x44 not found for command 0x80287610!
>
>
>
>
>
>
>
>
>


More information about the mythtv-users mailing list