[mythtv-users] MythTV - which SFF?

Paul Wheeler paulrwheeler at gmail.com
Wed Nov 10 11:32:02 UTC 2004


The bios was set right (i even tried all the pal types) i personnaly
put it down to the s-video to scart converter. Am not bothered now as
use the tvout on a pvr 350. My cpu had problems decoding stuff itslef
as is not very powerfull.
Paul


On Wed, 10 Nov 2004 11:26:43 +0000, Ciaran <ciaranj at gmail.com> wrote:
> As for the B&W, a couple of things to check ,  I had problems with a
> s-video to scart converter, it plain didn't work, had to swap to using
> video out to scart to get colour, also (but I don't know how this
> affects the PVR-350) I had to make sure that my bios was set to use
> PAL on on-board tv-out as it defaulted to NTSC and my TV is PAL, so
> bootup was black and white...but this is probably irrelevant for you..
>  -Ciaran
> 
> 
> 
> 
> On Wed, 10 Nov 2004 11:04:51 +0000, Paul Wheeler <paulrwheeler at gmail.com> wrote:
> > I run my myth box on a shuttle SN41G2 it is the V1 i think as is a bit
> > old but it works  fine. I use the a PVR-350 so use the tv out on that.
> > I had issues with the shuttles tv out being in black and white. I have
> > no idea why this was, it happens in during boot up and the rest of the
> > time, it may well be because i was using a dodgy lead to connect to
> > the tv, i havent read anywhere else of anyon ewith th esame problem.
> >
> > As for pci slots, on my girlfriends myth box i did for her I used a
> > Hauppauge dec 2000t, these are a bit more expensive than the Nova's
> > but are usb and i have found that it works great, it also has other
> > advantages being usb, i.e. can easily change it to other computers,
> > can connect as many as you want etc.
> >
> > Hope it helps
> > Paul
> >
> >
> >
> >
> > On Wed, 10 Nov 2004 09:37:38 +0000, Ciaran <ciaranj at gmail.com> wrote:
> > > Hmm, I disagree I got two standard nova-ts in the pundit, it was tight
> > > but doable :)
> > > - Ciaran
> > >
> > > On Wed, 10 Nov 2004 10:25:31 +0100, mythtv at heisterberg.dk
> > >
> > >
> > > <mythtv at heisterberg.dk> wrote:
> > > >
> > > > I had the same considerations when buying mine a couple of weeks back. The
> > > > main issue I found with the Shutte design is that all of them only have one
> > > > PCI slot making it impossible to do a solution with two tuner cards which is
> > > > almost a must (at least in my opinion). I ended up with an Asus Pundit-R
> > > > which is also a small form-factor bare-bones but with two PCI slots and
> > > > onboard TV-out. After some initial issues with getting drivers etc. I'm
> > > > running smoothly (though there is a couple of things I need to look into).
> > > > Only issue with the Pundit is that you need low-profile PCI cards - I
> > > > currently have a Hauppauge PVR-250 in but it is a VERY tight fit. The next
> > > > one needs to be a low-profile e.g. LifeView or similar.
> > > >
> > > > I see you a mostly looking for DVB support - my recommendation would be to
> > > > start by finding a low-profile card before looking into bare-bones...
> > > >
> > > > Let me know if you need any other opinions straight from the liver... :-)
> > > >
> > > > lekkim
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >  "Jit V" <jit_v1 at hotmail.com>
> > > > Sent by: mythtv-users-bounces at mythtv.org
> > > >
> > > > 10-11-2004 00:03
> > > >
> > > > Please respond to
> > > >  Discussion about mythtv <mythtv-users at mythtv.org>
> > > >
> > > >
> > > > To mythtv-users at mythtv.org
> > > >
> > > > cc
> > > >
> > > > Subject [mythtv-users] MythTV - which SFF?
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Hello,
> > > >
> > > > I've seen a few threads floating around on the subject of various small form
> > > > factor boxes and the various issues people are having getting them up and
> > > > running. I was thinking of getting a Shuttle SN45G or the SN41G V2 - but
> > > > then read the threads on issues with the nforce2 chipset etc. Now I'm really
> > > > not sure what to get... :(
> > > >
> > > > I'd be greatful if someone could point me in the right direction of a SFF
> > > > that's got good support for linux and works well with mythtv. Since I'm
> > > > going to be using a dvb card I'm looking for something that will work under
> > > > the 2.6 kernel.
> > > >
> > > > I'm looking for something that supports the following:
> > > >
> > > > 1. One spare PCI slot to be uesd for a DVB card.
> > > > 2. On board 5.1 surround sound - which can be used when playing dvds.
> > > > 3. S-Video for use with a tv.
> > > > 4. A motherboard capable of taking a reasonable CPU - something that can
> > > > decode an MPEG2 stream, or at least a motherboard that has a graphics card
> > > > that can decode MPEG2.
> > > >
> > > > I'd also like to know whether it really is realistic to build a small stable
> > > > PVR that just 'works' everytime - it would be a real shame to blow 300-350
> > > > GBP on something that doesn't quite work.
> > > >
> > > > Thank you
> > > >
> > > > - Jit
> > > >
> > > >  ________________________________
> > > > Rock, jazz, country, soul & more. Find the music you love on MSN Music!
> > > > _______________________________________________
> > > >  mythtv-users mailing list
> > > >  mythtv-users at mythtv.org
> > > >  http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> > > >
> > > >
> > > > _______________________________________________
> > > > mythtv-users mailing list
> > > > mythtv-users at mythtv.org
> > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> > > >
> > > >
> > > >
> > >
> > >
> > > --
> > > - Ciaran
> > >
> > >
> > > _______________________________________________
> >
> >
> > > mythtv-users mailing list
> > > mythtv-users at mythtv.org
> > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> > >
> > >
> > >
> >
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> >
> >
> 
> --
> - Ciaran
>


More information about the mythtv-users mailing list