[mythtv-users] Can't get my (new) PVR-250 working

[Footer]

Here are the unresolved symbol errors:
----------
[root at media_furnace apt]# /sbin/depmod -a
depmod: *** Unresolved symbols in
/lib/modules/2.4.20-35_39.rh9.at/updates/drivers/media/video/bttv.o
depmod: *** Unresolved symbols in
/lib/modules/2.4.20-35_39.rh9.at/updates/drivers/media/video/ir-common.o
depmod: *** Unresolved symbols in
/lib/modules/2.4.20-35_39.rh9.at/updates/drivers/media/video/msp3400.o
depmod: *** Unresolved symbols in
/lib/modules/2.4.20-35_39.rh9.at/updates/drivers/media/video/tvaudio.o
depmod: *** Unresolved symbols in
/lib/modules/2.4.20-35_39.rh9.at/updates/drivers/media/video/tvmixer.o
depmod: *** Unresolved symbols in
/lib/modules/2.4.20-35_39.rh9.at/updates/drivers/media/video/video-buf.o
[root at media_furnace apt]#
----------
And I also just discovered this when launching mythbackend:
----------
bash-2.05b# mythbackend
Starting up as the master server.
2004-11-02 16:16:57 Channel::Open(): Can't open: /dev/video0
/dev/video0: No such device
2004-11-02 16:16:57 Channel::Open(): Can't open: /dev/video0
/dev/video0: No such device
Couldn't find input: Television on card
 is defined, but isn't attached to a cardinput.
/dev/video0 is defined, but isn't attached to a cardinput.
2004-11-02 16:16:57 mythbackend version: 0.16.20040906-1 www.mythtv.org
2004-11-02 16:16:57 Enabled verbose msgs : important general
2004-11-02 16:16:59 Found changes in the todo list.
2004-11-02 16:16:59 Scheduled 0 items in 0.005023 seconds.
2004-11-02 16:16:59 Seem to be woken up by USER
----------
What the heck is cardinput???

So many questions, so little time.  :-)  I'll give the rc2 drivers a
try ... Thanks for the thoughts thus far!

TLD

On Tue, 2 Nov 2004 22:12:11 -0000, John Harvey
<john.p.harvey at btinternet.com> wrote:
> What are the unresolved symbols.
> It does load ok on RH9 I use a 350 there which uses the same driver but more
> of it so the 250 is definitely ok.
> Which version of ivtv are you using. It is quite likely that you may well
> hit problems with the tuner module being newer than is recognized by RH9
> (And FC1 & FC2 as well) .
> 
> I would recommend starting with the latest rc2 candidate available from
> 
> http://67.18.1.101/~ckennedy/ivtv/
> 
> since the auto-detection of tuners and other things is much better than the
> 0.1.9 version.
> 
> John
> 
> 
> 
> > -----Original Message-----
> > From: mythtv-users-bounces at mythtv.org [mailto:mythtv-users-
> > bounces at mythtv.org] On Behalf Of Footer
> > Sent: 02 November 2004 21:39
> > To: mythtv-users at mythtv.org
> > Subject: [mythtv-users] Can't get my (new) PVR-250 working
> >
> > Greetings all,
> >
> > I'm fairly new to MythTV and brand new to installing drivers for TV
> > tuner capture cards in Linux.  I recently purchased a PVR-250 directly
> > from Hauppauge and am in the process of trying to load the drivers for
> > it on my RH9 box.  The exact description of the capture card is (from
> > the box it came in):  WinTV-PVR-250 model 980 and I've been able to
> > see it using lspci -v and know that it's a rev 01 card.
> >
> > Backing up a bit, I built my MythTV box about a year ago (without TV
> > tuner card) and hooked it up to my HDTV and it works perfectly (for
> > displaying digital pictures, playing MP3s, Myth Weather, etc).  At the
> > time FC1 was just coming out but I went with RH9 anyway.  I'm
> > currently running the 2.4.20-35_39 kernel and I believe I've
> > successfully loaded the correct ivtv drivers but I'm continuing to get
> > "unresolved symbol" errors after running /sbin/depmod -a so obviously
> > I still don't have everything quite right.  I've been using Jarod's
> > Fedora Myth(TV)ology site and this mailing list to
> > install/troubleshoot.
> >
> > At any rate, I guess my real question is should I continue to try to
> > get things working on RH9 (hopefully with help from the fine folks
> > here) or bite the bullet and go to FC2 (FC3?) and hope things go
> > smoother?  Has anyone been successful at running a newer PVR-250 on
> > RH9 with the appropriate ivtv drivers using apt-get?
> >
> > Currently:  STUMPED but DETERMINED to make it work!
> >
> > Thanks!
> > TLD
> > aka Footer
> 
>