[mythtv-users] OT: Lirc Problems

[Ignacio Rodriguez]

Hello, i am having 3 more problems.
1. How do i release the seial port on boot? I tried adding that line
to /etc/rc0.d/ec.local, but it dosen't seem to work.
2. Whenever i try chkconfig --level 35 i get  this message:

mythtv:/home/mythtv# chkconfig --level 35 lircd on
error reading information on service lircd: No such file or directory

3. Whenever i cant get my remote to control myth tv. When i run
irxexec it says it's giving me the right commands, but just nothing
happens in myth.

Thanks again for all the help.

On Fri, 30 Jul 2004 10:10:27 -0700 (PDT), Dex West <dexwest at yahoo.com> wrote:
> 
> --- Ignacio Rodriguez <iggy88 at gmail.com> wrote:
> 
> > Ok, here is wher i stand:
> > Reciever: I have gotten the reciever part working fine, testing it
> > with irw and mode2, but i am having trouble getting the keybindings to
> > work. I have configured my .lircrc
> > to work with my remote, and when i run irexec, it seems like all of
> > the commands are woeking fine. In case it helps, I have include my
> > lircd.config file as well as my .lircrc file. Thanks for everything
> >
> > Transmitter: Not getting anywhere. i would like to try to run the rc
> > program to test it, but my comp dosen't seem to have it, i compiled my
> > driver from the lastest cvs version. If anyone can point me to where
> > ican download the lirc tools, i would be very happpy.
> 
> pretty sure rc got renamed to irsend, try looking for that instead.
> >
> > Thanks a bunch for helping me solve this last (hopefully) problem :)
> >
> > On Thu, 29 Jul 2004 16:49:47 -0400, Michael T. Dean
> > <mtdean at thirdcontact.com> wrote:
> > > Ignacio Rodriguez wrote:
> > >
> > > >Ok i got the reciever working, the command to release the serial port
> > > >was setserial /dev/ttyS0 uart none not setserial /dev/tty0 uart none.
> > > >
> > > >
> > > Sorry for the typo.  Guess I should have gone to bed before 3:49 am
> > > yesterday/today.  Glad you tried the man page (or whatever caused you to
> > > find the typo).
> > >
> > > >But now i am having trubble with my transmitter. When i compiled lirc,
> > > > i used the homebrew reciever option with the option to use
> > > >transmitter diode. I have a hb reciever with a trans on the same port.
> > > >Can anyone tell me how to get the trans working, or if i have to
> > > >install another copy of lirc, witch option do i choose?
> > > >
> > > >
> > > You don't need another copy of LIRC for a homebrew
> > > receiver/transmitter.  Assuming it's all wired correctly, you have the
> > > correct permissions on sockets (i.e. /dev/lircd), and the proper
> > > configuration files (i.e. /etc/lircd.conf), the transmitter should work.
> > >
> > > Without more info (i.e. error messages, observed behavior, types of
> > > tests you performed (i.e. using a color LED, commands issued, etc.),
> > > system configuration diagnostics (i.e. output of lsmod, ls -al
> > > /dev/lirc*, ), it would be very difficult to guess what is causing the
> > > problem.
> > >
> > > Mike
> > >
> > > >On Thu, 29 Jul 2004 10:16:50 -0700, Ignacio Rodriguez <iggy88 at gmail.com> wrote:
> > > >
> > > >
> > > >>On Thu, 29 Jul 2004 03:49:24 -0400, Michael T. Dean
> > > >><mtdean at thirdcontact.com> wrote:
> > > >>
> > > >>
> > >
> > > _______________________________________________
> > > mythtv-users mailing list
> > > mythtv-users at mythtv.org
> > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> > >
> >
> 
> > ATTACHMENT part 2 application/octet-stream name=.lircrc
> 
> > ATTACHMENT part 3 application/octet-stream name=lircd.conf
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> 
>                 
> __________________________________
> Do you Yahoo!?
> New and Improved Yahoo! Mail - 100MB free storage!
> http://promotions.yahoo.com/new_mail
> 
> 
>