[mythtv-users] PVR-250 Setting bitrate
Shawn Kwang
skwang at hep.uchicago.edu
Wed Oct 15 14:29:54 EDT 2003
Sort of on-topic for this thread, I'd like to know what people with ivtv
and a PVR-250 are getting in terms of GB/hr. That is what capture
resolution, video and audio bitrate results how many GB/hr.
I think 2GB/hr is too large, and I'm wondering how other people are
doing.
Thanks in advance,
Shawn Kwang
On Wed, 15 Oct 2003, Jim Chandler wrote:
> I use the post-install command in my /etc/modules.conf file so that it
> gets run after ivtv gets put into the kernel.
>
> Jim
>
> On Wed, 15 Oct 2003 11:30:34 -0400
> Graham Siener <gbs at alumni.brown.edu> wrote:
>
> > I'm running Myth .11 with a PVR 250. I don't want to record at full
> > bitrate, rather at 5Mbps/8Mbps peak. I've set this with
> >
> > # /usr/lib/ivtv/test_ioctl -c bitrate=5000000,bitrate_peak=8000000
> >
> > But upon restart, this setting is reset. If I set this when the backend
> > is off, it works fine. But I would like the setting to stick without
> > having to change it back all the time. I thought I could do this
> > through setup->tv setup->recording settings, but it doesn't seem to
> > work.
> >
> > With 5/8 an hour is about 2.4GB/hr, and 8/18 gives me 3.6.
> >
> > Sorry if this was too wordy, I just wanted to make sure I was clear.
> > I've searched but haven't really found anything...
> >
> > Any suggestions? Thanks for the help!
> >
> > Graham
> >
> >
>
--
skwang-at-fnal.gov
shawn.kwang-at-cern.ch
More information about the mythtv-users
mailing list