[mythtv-users] ivtv: Error detecting PCI card

[Augustin Chan]

Sorry, forgot to include a subject.  Argh...
--- Augustin Chan <auchan at yahoo.com> wrote:
> Hi all,
> 
> I'm having problems with getting ivtv to detect my WinTV PVR250 card (using a
> Geforce 4 MX440 for TV-Out).  For those familiar, I'm using all the rpms from
> ATrpms in an attempt to get MythTV
> working!  
> 
> I'm running Redhat 9 (2.4.20-20_29.rh9.at) on an Athlon 900 Mhz box, with the
> AMD 751 Irongate chipset, using an old Asus K7M motherboard.  
> 
> Here's what /var/log/messages has to say after I try to do a modprobe ivtv:
> 
> Oct 31 23:29:06 localhost kernel: i2c-core.o: i2c core module version 2.8.0
> (20030714)
> Oct 31 23:29:06 localhost kernel: ivtv: Loading, I'll try to detect 1
> devices!
> Oct 31 23:29:06 localhost kernel: ivtv:  .. running on kernel
> 2.4.20-20_29.rh9.at
> Oct 31 23:29:06 localhost kernel: ivtv: Setting some variables to invalid for
> detection
> Oct 31 23:29:06 localhost kernel: ivtv: SGarray_size = 200, DSGarray_size =
> 16
> Oct 31 23:29:06 localhost kernel: ivtv: Scanning PCI bus..
> Oct 31 23:29:06 localhost kernel: ivtv: Found card #0
> Oct 31 23:29:06 localhost kernel: ivtv: Found an iTVC15 based chip
> Oct 31 23:29:06 localhost kernel: ivtv: base addr: 0xe8000000
> Oct 31 23:29:06 localhost kernel: ivtv: Enabling pci device
> Oct 31 23:29:06 localhost kernel: PCI: Found IRQ 11 for device 00:0d.0
> Oct 31 23:29:06 localhost kernel: PCI: Sharing IRQ 11 with 01:05.0
> Oct 31 23:29:06 localhost kernel: ivtv: Error detecting PCI card
> 
> And here's the very verbose output from lspci for my capture card:
> [root at localhost root]# lspci -vv -s 00:0d.0
> 00:0d.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2
> Encoder (rev 01)
>         Subsystem: Hauppauge computer works Inc.: Unknown device 4001
>         Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Interrupt: pin A routed to IRQ 11
>         Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
>         Capabilities: [44] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> Thanks in advance for your help and kudos to Jarod, Isaac et. al. for all
> their
> hard work!
> 
> Aug
> 
> 
> =====
> Augustin Chan
> auchan at yahoo.com
> 
> __________________________________
> Do you Yahoo!?
> Exclusive Video Premiere - Britney Spears
> http://launch.yahoo.com/promos/britneyspears/
> 


=====
Augustin Chan
auchan at yahoo.com

__________________________________
Do you Yahoo!?
Exclusive Video Premiere - Britney Spears
http://launch.yahoo.com/promos/britneyspears/