[mythtv-users] (no subject)

[Augustin Chan]

Hi all,

I'm having problems with getting ivtv to detect my WinTV PVR250 card (using a
Geforce 4 MX440 for TV-Out).  For those familiar, I'm using all the rpms from
ATrpms in an attempt to get MythTV
working!  

I'm running Redhat 9 (2.4.20-20_29.rh9.at) on an Athlon 900 Mhz box, with the
AMD 751 Irongate chipset, using an old Asus K7M motherboard.  

Here's what /var/log/messages has to say after I try to do a modprobe ivtv:

Oct 31 23:29:06 localhost kernel: i2c-core.o: i2c core module version 2.8.0
(20030714)
Oct 31 23:29:06 localhost kernel: ivtv: Loading, I'll try to detect 1 devices!
Oct 31 23:29:06 localhost kernel: ivtv:  .. running on kernel
2.4.20-20_29.rh9.at
Oct 31 23:29:06 localhost kernel: ivtv: Setting some variables to invalid for
detection
Oct 31 23:29:06 localhost kernel: ivtv: SGarray_size = 200, DSGarray_size = 16
Oct 31 23:29:06 localhost kernel: ivtv: Scanning PCI bus..
Oct 31 23:29:06 localhost kernel: ivtv: Found card #0
Oct 31 23:29:06 localhost kernel: ivtv: Found an iTVC15 based chip
Oct 31 23:29:06 localhost kernel: ivtv: base addr: 0xe8000000
Oct 31 23:29:06 localhost kernel: ivtv: Enabling pci device
Oct 31 23:29:06 localhost kernel: PCI: Found IRQ 11 for device 00:0d.0
Oct 31 23:29:06 localhost kernel: PCI: Sharing IRQ 11 with 01:05.0
Oct 31 23:29:06 localhost kernel: ivtv: Error detecting PCI card

And here's the very verbose output from lspci for my capture card:
[root at localhost root]# lspci -vv -s 00:0d.0
00:0d.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2
Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device 4001
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Thanks in advance for your help and kudos to Jarod, Isaac et. al. for all their
hard work!

Aug


=====
Augustin Chan
auchan at yahoo.com

__________________________________
Do you Yahoo!?
Exclusive Video Premiere - Britney Spears
http://launch.yahoo.com/promos/britneyspears/