[mythtv-users] compile Problem debian unstable

[Florian Zierer]

There are RS parts listed here:

http://sourceforge.net/mailarchive/forum.php?thread_id=590689&forum_id=5339

I found the IR receiver was a different part number
(see below).  

I made one last night.  I tried to get most of the
parts from a local electronic store but did have to
get the IR receiver and voltage regulator at RS.

I used the list from the lirc.org page. These are the
parts I got at RS:

- 38Khz IR Receiver (276-640) 
- voltage regulator (276-1770)

>From the other store I got:
- 4.7µF capacitor
- 1N4148 diode
- 4k7 resistor (4.7 kOhm)

You may also need the 9-pin or 25-pin SUB-D socket
sierial port connector and a board to solder the
pieces to, unless you want to try to pack this into
the case like the "Alessio Sangalli" did here:

http://www.manoweb.com/alesan/lirc/

I  haven't tested mine but the docs on lirc were easy
to follow.  Make sure you check the +,- and data on
the IR receiver if you get the one I got from RS.  

--- Ray Parish <rparish at digitalwebzone.com> wrote:
> Yes, can you please post the parts list?
> 
> On 4/13/03 2:28 AM, "Jason Ramey"
> <webmaster at permutation.org> wrote:
> 
> > I built my own, for about 13 dollars worth of
> parts from Radio Shack. I'm by
> > no means a wiz with the soldering iron and it only
> took me about 20 minutes.
> > A good howto is posted here:
> > 
> > http://www.manoweb.com/alesan/lirc/
> > 
> > If you are interested, I can also post a parts
> list for Radio Shack
> > (assuming that you are in the US).
> > 
> > Jason Ramey
> > webmaster at permutation.org
> > 
> > ----- Original Message -----
> > From: "Ray Parish" <rparish at digitalwebzone.com>
> > To: "Discussion about mythtv"
> <mythtv-users at snowman.net>
> > Sent: Saturday, April 12, 2003 6:41 PM
> > Subject: Re: [mythtv-users] Newbie
> > 
> > 
> >> Thanks Jason for the Reply..
> >> 
> >> I see a lot of links regarding the IR blaster..
> What is suggested for an
> > IR
> >> receiver?
> >> 
> >> Thanks
> >> Ray
> >> 
> >> 
> >> 
> >> 
> >> On 4/12/03 6:07 PM, "Jason Tackaberry"
> <tack at auc.ca> wrote:
> >> 
> >>> On Sat, 2003-04-12 at 17:50, Ray Parish wrote:
> >>>> Ok I have MythTV installed on RedHat 9,
> Everything seems to be
> > working.. My
> >>>> question is where can I find documentation on
> what keyboard strokes are
> > used
> >>>> to control mythtv. (i.e. pause live TV, rewind,
> menu, etc.)
> >>> 
> >>> There's a file called keys.txt in the source
> distribution.
> >>> 
> >>>> Is the theory of MythTV to, have a remote that
> would control MythTV,
> > then
> >>>> MythTV would run that perl script to an IR
> blaster to have cable or sat
> > box
> >>>> change the actual channel? If this is the case,
> would one need 2 IR
> >>>> blasters?
> >>> 
> >>> No, one IR receiver, and one IR blaster.  But
> yes, that's the theory,
> >>> unless you don't have a digital cable or
> satellite receiver and you let
> >>> your tv card do the tuning.
> >>> 
> >>> Jason.
> >> 
> >> _______________________________________________
> >> mythtv-users mailing list
> >> mythtv-users at snowman.net
> >>
>
http://lists.snowman.net/cgi-bin/mailman/listinfo/mythtv-users
> >> 
> > 
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at snowman.net
> >
>
http://lists.snowman.net/cgi-bin/mailman/listinfo/mythtv-users
> > 
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at snowman.net
>
http://lists.snowman.net/cgi-bin/mailman/listinfo/mythtv-users


__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
http://tax.yahoo.com