[mythtv-users] adding HDHR to system
David Engel
david at istwok.net
Sat Mar 2 21:06:32 UTC 2019
On Sat, Mar 02, 2019 at 01:40:43PM -0500, James Abernathy wrote:
>
> On 3/2/19 1:29 PM, Greg Oliver wrote:
> > On Sat, Mar 2, 2019 at 12:07 PM James Abernathy <jfabernathy at gmail.com
> > <mailto:jfabernathy at gmail.com>> wrote:
> >
> > On 2/26/19 5:55 PM, Jim Abernathy wrote:
> > > Last project was eliminating my HDHR Quatro and replacing it with a
> > > Hauppauge WinTV Quad.
> > >
> > > That is complete and I'm using XMLTV sdjson_sqlite grabber. At
> > this
> > > point I'm stable, but on occasions I'm recording on all 4
> > channels of
> > > the WinTV and thought about adding the Quatro back for Live TV only.
> > >
> > > I can use the HDHomerun Viewer to watch live tv on the Quatro, but
> > > it's not integrated with Mythtv.
> > >
> > > So my question is can I add the Quatro back into mythtv using the
> > > Blackbox external recorder, mythhdhrrecorder, and still use my
> > exiting
> > > EPG database I setup for the WinTV using
> > tv_grab_zz_sdjson_sqlite. I
> > > don't want to screw up my exiting recordings or pending recordings.
> > > Can I setup the mythtvhdhrrecorder to use my existing SD XMLTV
> > source
> > > or do I have to have a new video source just for the
> > mythhdhrrecorder???
> > >
> > > Jim A
> > >
> > I did some experimenting and I found that you can NOT just add a
> > mythhdhrrecorder tuner and have it use the existing Video Source
> > used by
> > other tuners (WinTV QuadHD). It fails on open.
> >
> > So my question: Is there a requirement that each Capture Card have
> > its
> > own separate Video Source defined even if each Video Source is using
> > SchedulesDirect XMLTV sdjson grabber_sqlite? My assumption is a 4
> > tuner
> > card would use the same video source for all 4 tuners. Possibly if
> > you
> > had 2 exact same model Capture Cards then they they might use the
> > same
> > Video Source.
> >
> > Are there any hard and fast rules on when you can use the same video
> > source??
> >
> > Jim A
> >
> > There must be something else going on there because I have done exactly
> > what you describe several times.
> >
> > I have 3 lineups - one for OTA US (zipcode), 1 for DirecTV and 1 for
> > uVerse. I can bind the OTA lineup to any number of cards/HDHRs
> > simultaneously without issue. Is there anything else in the log when
> > you fire the backend back up?
>
>
> I think this issue is specific to using the Blackbox external recorder,
> mythhdhrrecorder. I went back and add the HDHR as HDHR tuners and just
> created Input Connections for these tuners using the existing SD video
> source and it worked fine.
>
> So I guess if I want to use the mythhdhrrecorder for it's TCP/IP usage of
> the HDHR, then I'll have to rebuild from the ground up and define one video
> source for the tuners on mythhdhrrecorder and one for the hauppauge WinTV
> quad.
>
> Which I will not do, so I'll stuck the what I have.
mythhdhrrecorder only supports tuning by virtual channel number. Your
Hauppauge WinTV almost certainly only supports tuning by
frequency/program tuning so it can't share the same videosource with
mythhdhrrecorder. The internal, HDHR recorder supports both virtual
channel number and frequency/program tuning so it can share the same
videosource with your Hauppauge WinTV.
David
--
David Engel
david at istwok.net
More information about the mythtv-users
mailing list