[mythtv-users] HDHR prob with new wallwarts

[Daryl McDonald]

On Mon, Dec 9, 2019 at 3:19 PM Allen Edwards <allen.p.edwards at gmail.com>
wrote:

> You will have to edit some of the IP addresses to reflect your situation
> but yes, just edit the file on your system. I am not home now so can't
> check details so ask if you have any questions and I will reply when I
> return.
>
> On Mon, Dec 9, 2019, 10:55 AM Daryl McDonald <darylangela at gmail.com>
> wrote:
>
>>
>>
>> On Mon, Dec 9, 2019, 9:53 AM Allen Edwards <allen.p.edwards at gmail.com>
>> wrote:
>>
>>> Perhaps I am not following closely enough. But are we not talking about
>>> the recording stopping? If so, I pointed out a known problem with Linux
>>> that causes the Linux box to drop connection with a HDHR box. I posted a
>>> test to verify if this is the problem. Has that been tried?  I also posted
>>> the solution. I had this exact problem, or at least similar. Has that
>>> solution been ruled out? I seem to have missed that. I also have a similar
>>> setup with not one but two HDHRs and even when recording three shows at
>>> once and perhaps four, my $20 switch has no problem. What am I missing?
>>> Just to be clear on the network setup the small 5 port switch has just
>>> three inputs and one output which goes to the router. There should not be
>>> enough traffic from the two HDHRs to ever overload the 100Mb switch. It is
>>> a switch and should not be dealing with anything from other parts of the
>>> network.
>>> ________________________________
>>>
>>
>> Allen, are you referring to the ifup/ifdown post from very early in the
>> thread? Assuming yes how is this implemented? Do I just nano the new file?
>>
>>> _____________________________________________
>>
>
I've been waiting to see a failed recording, and paste a "shortlog" here,
but that hasn't happened. Granted recording volume is down due to reruns,
and the only other varriable is that I used the HDHRs to rescan my
channels. Previoulsy, I was using a scan from one of my PCI cards. Could
the scan make a difference? It was the only thing in the howto that I
hadn't done, and it did update one channel relocate. (not related to any
previous failure)
Allen, if I read you correctly, our setups might be slightly different in
that I have four cables in my switch, router, two HDHRs and PC, which,
IIUC, removes IP reservations and routing from the equasion, anyway, for
now, merrily rolling along. (ho ho ho)   Daryl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20191212/914f5090/attachment.htm>