[mythtv-users] HDHR prob with new wallwarts

[Allen Edwards]

You will have to edit some of the IP addresses to reflect your situation
but yes, just edit the file on your system. I am not home now so can't
check details so ask if you have any questions and I will reply when I
return.

On Mon, Dec 9, 2019, 10:55 AM Daryl McDonald <darylangela at gmail.com> wrote:

>
>
> On Mon, Dec 9, 2019, 9:53 AM Allen Edwards <allen.p.edwards at gmail.com>
> wrote:
>
>> Perhaps I am not following closely enough. But are we not talking about
>> the recording stopping? If so, I pointed out a known problem with Linux
>> that causes the Linux box to drop connection with a HDHR box. I posted a
>> test to verify if this is the problem. Has that been tried?  I also posted
>> the solution. I had this exact problem, or at least similar. Has that
>> solution been ruled out? I seem to have missed that. I also have a similar
>> setup with not one but two HDHRs and even when recording three shows at
>> once and perhaps four, my $20 switch has no problem. What am I missing?
>> Just to be clear on the network setup the small 5 port switch has just
>> three inputs and one output which goes to the router. There should not be
>> enough traffic from the two HDHRs to ever overload the 100Mb switch. It is
>> a switch and should not be dealing with anything from other parts of the
>> network.
>> ________________________________
>>
>
> Allen, are you referring to the ifup/ifdown post from very early in the
> thread? Assuming yes how is this implemented? Do I just nano the new file?
>
>> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://lists.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20191209/2f2660d8/attachment.htm>