[mythtv-users] Video card update fail

Greg Oliver oliver.greg at gmail.com
Mon Oct 8 00:50:34 UTC 2018


On Sun, Oct 7, 2018 at 7:15 PM Allen Edwards <allen.p.edwards at gmail.com>
wrote:

>
> On Sun, Oct 7, 2018 at 4:47 PM Greg Oliver <oliver.greg at gmail.com> wrote:
>
>> On Sun, Oct 7, 2018 at 6:18 PM Allen Edwards <allen.p.edwards at gmail.com>
>> wrote:
>>
>>> My system is using a Nvidia 6200.  DVI out to the TV and analog to a
>>> monitor. I am running Mythbuntu 16 on an old AMD 5400.  Sound is analog to
>>> the TV and SPDIF to a surround system we use for a few shows.
>>>
>>> After many hours I kind of got the new Nvidia 750ti card working.  I
>>> could not get the onboard audio to work no matter what my son and I tried
>>> and he is a Google software engineer so it stumped us both.  I had to cut
>>> down a HDMI connector to get the cable to fit but with that and several
>>> hours I got sound to the TV.  Not a permanent solution as no digital sound
>>> to the surround system.
>>>
>>
>> You should have immediately returned the card if HDMI did not fit.
>>
>
> The interference was with my case, not the video card. Plus, the card was
> a gift from a friend. I just used a grinder and took off the side of the
> connector and it fit fine :-)
>
>
>>
>>
>>
>>> The final straw was that when I turned off the TV and turned it back on,
>>> Myth was on the monitor and not on the TV.  I tried both checkboxes on the
>>> find new devices and both acted the same.  The driver at that point was
>>> 340.  The other choice was 361 which I used at first but switched at some
>>> point to get a picture to display.  Lots of trouble with the video card
>>> reading the TV EDIT wrong and sending out incorrect settings which would
>>> not display at all. Not sure if the driver was the issue but long story
>>> short, I ended up with the 340 driver.
>>>
>>> Finally I took out the 750ti and reinstalled my 6200 and sound works,
>>> myth doesn't switch when the TV is off.  Only issue is I got a little
>>> better picture quality with the 750 on VDPAU slim. Any higher level setting
>>> just crashed myth.
>>>
>>> I am 7 hours into getting nothing done.  Two of us working most of that
>>> time.  If anyone knows how to solve my problem I will put a few more hours
>>> into it.
>>>
>>> By the way, on the sound, we tried at least three audio managers, Alsa,
>>> Pulse, and one command line one to try and get audio out of the
>>> motherboard. Nothing worked.
>>>
>>
>> What does the speaker test produce in alsa and/or gnome/kde, etc..  I
>> believe long ago, Jean Yvess (sp?) killed pulse when mythfrontend started
>> playback, but I do not know if that is still the case.  You definitely do
>> not want anything except alsa for digital audio.
>>
>> Also, when selecting the different modes from the TV GUI, I always had to
>> restart mythfrontend (that was long ago though - YMMV).
>>
>
>  I have to think if I restarted more or less than 100 times.  Clearly the
> video needs a restart.
>

:)  Make sure to run alsamixer and make sure it is unmuted on the PCM
interface.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20181007/4355f6d4/attachment.html>


More information about the mythtv-users mailing list