[mythtv-users] Problem with LIRC after upgrade to Fedora 24

[Jerry]

I don't get any response from irw at all now.  When I try mode2, I get this
after pressing one button:

[root at sirius lirc]# mode2 --driver devinput --device /dev/lirc0
Using driver devinput on device /dev/lirc0
Trying device: /dev/lirc0
Using device: /dev/lirc0
Warning: Running as root.
Partial read 8 bytes on /dev/lirc0[root at sirius lirc]#

[root at sirius lirc]# systemctl status lircd.service
● lircd.service - Flexible IR remote input/output application support
   Loaded: loaded (/usr/lib/systemd/system/lircd.service; enabled; vendor
preset: disabled)
   Active: active (running) since Mon 2016-07-04 12:06:36 EDT; 10min ago
     Docs: man:lircd(8)
           http://lirc.org/html/configure.html
 Main PID: 6362 (lircd)
    Tasks: 1 (limit: 512)
   CGroup: /system.slice/lircd.service
           └─6362 /usr/sbin/lircd --nodaemon

Jul 04 12:06:42 sirius lircd[6362]: lircd-0.9.4a[6362]: Notice: accepted
new client on /var/run/lirc/lircd
Jul 04 12:06:42 sirius lircd[6362]: lircd-0.9.4a[6362]: Info: initializing
'auto'
Jul 04 12:06:42 sirius lircd-0.9.4a[6362]: Notice: accepted new client on
/var/run/lirc/lircd
Jul 04 12:06:42 sirius lircd[6362]: lircd-0.9.4a[6362]: Info: Using device:
/dev/input/event4
Jul 04 12:06:42 sirius lircd-0.9.4a[6362]: Info: initializing 'auto'
Jul 04 12:06:42 sirius lircd-0.9.4a[6362]: Info: Using device:
/dev/input/event4
Jul 04 12:06:47 sirius lircd[6362]: lircd-0.9.4a[6362]: Info: removed client
Jul 04 12:06:47 sirius lircd[6362]: lircd-0.9.4a[6362]: Info: closing
'/dev/input/event4'
Jul 04 12:06:47 sirius lircd-0.9.4a[6362]: Info: removed client
Jul 04 12:06:47 sirius lircd-0.9.4a[6362]: Info: closing '/dev/input/event4'
[root at sirius lirc]#

[root at sirius ~]# cat /sys/class/rc/rc0/protocols
other unknown rc-5 nec rc-6 jvc sony rc-5-sz sanyo sharp mce_kbd xmp [lirc]
[root at sirius ~]# cat /usr/lib/systemd/system/lircd.service
[Unit]
Documentation=man:lircd(8)
Documentation=http://lirc.org/html/configure.html
Description=Flexible IR remote input/output application support
Wants=lircd-setup.service
After=network.target lircd-setup.service

[Service]
Type=simple
ExecStart=/usr/sbin/lircd --nodaemon
; User=lirc
; Group=lirc

[Install]
WantedBy=multi-user.target
[root at sirius ~]#

I have a mceusb remote that has worked fine until this morning.  LIRC is
not my strong suit but I've had the same configuration for ages now without
issues.  I guess I'll plug in the FLIRC for now but I'd like to get this
resolved if possible in LIRC as it works better with my setup.

Any help would be appreciated.

Thanks!
Jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20160704/9f1ac611/attachment.html>