[mythtv-users] HD-PVR stops recording about 1-2 minutes into session

[Scott Bickford]

I connected the HD-PVR to a new box and had similar issues.  Kill-a-watt
was showing 9 volts and .04 amps under no load.  I did not try it when it
was under load.

I then purchased a new power supply.  After five hours or so of varying
length recordings, it has not had any problems.  One thing I notice the
blue light seems brighter.

In the final days I was seeing disconnects and reconnects.  It would even
go from /dev/video0 to /dev/video1

[ 5750.865421] usb 1-3: USB disconnect, device number 2
[ 5750.865488] hdpvr 1-3:1.0: usb_submit_urb in hdpvr_submit_buffers
returned -19
[ 5750.865491] hdpvr 1-3:1.0: usb_submit_urb in hdpvr_submit_buffers
returned -19
[ 5750.865491] hdpvr 1-3:1.0: usb_submit_urb in hdpvr_submit_buffers
returned -19
[ 5750.865492] hdpvr 1-3:1.0: couldn't submit buffers
[ 5750.865534] hdpvr 1-3:1.0: device video0 disconnected
[ 5761.617857] usb 1-3: new full-speed USB device number 4 using xhci_hcd
[ 5761.770840] usb 1-3: device descriptor read/64, error -71
[ 5762.024766] usb 1-3: device descriptor read/64, error -71
[ 5762.278665] usb 1-3: new full-speed USB device number 5 using xhci_hcd
[ 5762.431648] usb 1-3: device descriptor read/64, error -71
[ 5777.887206] usb 1-3: new high-speed USB device number 6 using xhci_hcd
[ 5778.098507] usb 1-3: New USB device found, idVendor=2040, idProduct=4902
[ 5778.098514] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 5778.098518] usb 1-3: Product: Hauppauge HD PVR
[ 5778.098522] usb 1-3: Manufacturer: AMBA
[ 5778.098525] usb 1-3: SerialNumber: 00A4083B
[ 5778.118912] hdpvr 1-3:1.0: firmware version 0x1e dated Mar  7 2012
08:25:15
[ 5778.622623] hdpvr 1-3:1.0: device now attached to video1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20160218/f1783947/attachment.html>