[mythtv-users] Can't get lirc or irw to work, but mode2 works
Hika van den Hoven
hikavdh at gmail.com
Sun Jun 21 09:10:06 UTC 2015
Hoi Jerry,
Sunday, June 21, 2015, 6:21:10 AM, you wrote:
> I have a newly setup LIVA box, frontend only, using the latest mythbuntu.
> It has a USB ir receiver, and I configured lirc to use mceusb remote.
> If I stop lircd and run mode2, it spews out data when I press buttons on
> the remote. So I know the hardware is working. However I can't get irw to
> print anything. The receiver is the same ir receiver I was using with my
> original frontend, configured the same way, although with an older version
> of mythbuntu a few years ago.
> Info from the new machine:
> jerry at squeek:~$ lsusb
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 003: ID 1784:0008 TopSeed Technology Corp. eHome Infrared
> Transceiver
> Bus 001 Device 002: ID 04f2:0402 Chicony Electronics Co., Ltd Genius
> LuxeMate i200 Keyboard
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> jerry at squeek:~$ lsmod | grep lirc
> ir_lirc_codec 13062 3
> lirc_dev 19980 1 ir_lirc_codec
> rc_core 28718 13
> ir_sharp_decoder,lirc_dev,ir_lirc_codec,ir_rc5_decoder,ir_nec_decoder,ir_sony_decoder,mceusb,ir_mce_kbd_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_sanyo_decoder,rc_rc6_mce
> jerry at squeek:~$ ls -l /dev/lirc*
> crw------- 1 root root 250, 0 Jun 20 22:55 /dev/lirc0
> lrwxrwxrwx 1 root root 15 Jun 20 22:55 /dev/lircd -> /run/lirc/lircd
> jerry at squeek:~$ ps aux | grep lirc
> root 566 0.0 0.1 33112 2000 ? Ss Jun20 0:00
> /usr/sbin/lircd --output=/run/lirc/lircd --device=/dev/lirc0
> Any suggestions?
> -Jerry
Have you read this thread from early this month "Anyone Using LIRC on
CentOS 6.6?" A lot of possible issues come up there!
Tot mails,
Hika mailto:hikavdh at gmail.com
"Zonder hoop kun je niet leven
Zonder leven is er geen hoop
Het eeuwige dilemma
Zeker als je hoop moet vernietigen om te kunnen overleven!"
De lerende Mens
More information about the mythtv-users
mailing list