[mythtv-users] Can't get lirc or irw to work, but mode2 works
Jerry Rubinow
jerrymr at gmail.com
Sun Jun 21 04:21:10 UTC 2015
I have a newly setup LIVA box, frontend only, using the latest mythbuntu.
It has a USB ir receiver, and I configured lirc to use mceusb remote.
If I stop lircd and run mode2, it spews out data when I press buttons on
the remote. So I know the hardware is working. However I can't get irw to
print anything. The receiver is the same ir receiver I was using with my
original frontend, configured the same way, although with an older version
of mythbuntu a few years ago.
Info from the new machine:
jerry at squeek:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 1784:0008 TopSeed Technology Corp. eHome Infrared
Transceiver
Bus 001 Device 002: ID 04f2:0402 Chicony Electronics Co., Ltd Genius
LuxeMate i200 Keyboard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
jerry at squeek:~$ lsmod | grep lirc
ir_lirc_codec 13062 3
lirc_dev 19980 1 ir_lirc_codec
rc_core 28718 13
ir_sharp_decoder,lirc_dev,ir_lirc_codec,ir_rc5_decoder,ir_nec_decoder,ir_sony_decoder,mceusb,ir_mce_kbd_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_sanyo_decoder,rc_rc6_mce
jerry at squeek:~$ ls -l /dev/lirc*
crw------- 1 root root 250, 0 Jun 20 22:55 /dev/lirc0
lrwxrwxrwx 1 root root 15 Jun 20 22:55 /dev/lircd -> /run/lirc/lircd
jerry at squeek:~$ ps aux | grep lirc
root 566 0.0 0.1 33112 2000 ? Ss Jun20 0:00
/usr/sbin/lircd --output=/run/lirc/lircd --device=/dev/lirc0
Any suggestions?
-Jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20150621/08db038a/attachment.html>
More information about the mythtv-users
mailing list