[mythtv-users] Still trying to get Ceton InfiniTV working

[Michael A Weber]

On Jul 9, 2014, at 7:29 PM, Joseph DeGraw <coffee412 at comcast.net> wrote:

> On 07/09/2014 08:09 PM, Greg Thompson wrote:
>> 
>>> On Jul 9, 2014, at 8:03 PM, Kevin Calvert <kevin at eleventhree.com> wrote:
>>> 
>>> I guess I should've asked--this Certon InfiniTV 6 PCIe is not cablelabs certified?
>>> 
>>> Is there any good option? I still have my HDHR Prime... is that certified?
>>> 
>>> 
>>> 
>>> 
>>> Kevin
>>> 
>>> Eleven Three Labs LLC
>>> eleventhree.com
>> 
>> It is cable labs certified… its doing what it should do.. Its keeping you from watching an Copy Once program on a non DRMed system… 
>> 
>> Greg
>> 
>> 
>> 
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>> http://wiki.mythtv.org/Mailing_List_etiquette
>> MythTV Forums: https://forum.mythtv.org
> I have comcrap and the ceton 4 port card. Works fine. No problems. That being said, Perhaps your problem might be a bad cable card? I have heard of that happening. Otherwise I would agree with the other posters that its a comcrap screw up. Probably not paired correctly. Perhaps as they were typing in the numbers they screwed it up? -- Something like that.
> 
> I had an issue where my card would not pick up some channels. They had a filter on the line that caused the problem.
> 
> I really dont like comcrap.
> 
> JDeGraw
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://www.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org

Kevin—

I completely agree with Joseph.  Even though I was on RCN instead of Comcast, the first cable card they issued appeared to be setup with RCN correctly, but I was not able to tune anything.  They suggested I swap out the cable card, so off to RCN office I went.  I swapped out cable card, went home and plugged it in, and it worked perfectly.  So, either it was a failed pairing or a defective cable card, and the replacement card and process addressed the problem from there on out.

Mike
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20140710/d21b8d28/attachment.html>