[mythtv-users] HDPVR and spdif issues
numkem at gmail.com
Mon Sep 10 12:20:14 UTC 2012
I`m currently trying to make my hdpvr (firmware 1.7.1) work with spdifwith
my newly upgraded MythTV 0.26 (as of today). I tried before with 0.25 and
it didn't work.
When I use v4l2-ctl to set the audio_encoding and the audio_input manually
and than do a cat /dev/video0 into a file, I get video and sound as it
should when I play it back with mplayer.
But when myth try to record after setting up the capture card to use spdif
instead of the back RCA I get things like this:
mythbackend: E RecThread mpegrecorder.cpp:1010 (run)
MPEGRec(/dev/video0): Device error detected
When turning on debugging with the hdpvr driver, I get this :
Aug 27 19:02:43 mythbox kernel: [92125.389290] hdpvr 1-3:1.0: streaming
Aug 27 19:02:43 mythbox kernel: [92125.389383] hdpvr 1-3:1.0:
hdpvr_submit_buffers:209 buffer stat: 0 free, 64 proc
Aug 27 19:02:46 mythbox kernel: [92127.902643] hdpvr 1-3:1.0: config call
request for value 0x800 returned 1
Aug 27 19:02:46 mythbox kernel: [92127.902675] hdpvr 1-3:1.0: transmit
Aug 27 19:02:46 mythbox kernel: [92128.052126] hdpvr 1-3:1.0: used 0 urbs
to empty device buffers
Aug 27 19:02:46 mythbox kernel: [92128.122861] hdpvr 1-3:1.0: video signal:
1920x1080 at 30hz
Aug 27 19:02:46 mythbox kernel: [92128.125494] hdpvr 1-3:1.0: encoder start
control request returned 0
Aug 27 19:02:46 mythbox kernel: [92128.151981] hdpvr 1-3:1.0: config call
request for value 0x700 returned 1
I`ve tried to add the v4l2-ctl commands to my scripts that already takes
care of fixing the contrast issues with the latest firmware or try to do it
by hand before a myth recording to no avail.
Thank you for your time.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the mythtv-users