[mythtv-users] Problem with EIT on HdhomerunHD

Per Kofod per.s.kofod at gmail.com
Tue Nov 8 10:18:21 UTC 2011

Hi I have a problem with EIT on my HDhomerun tuner.

I have a combined FE/BE running Mythbuntu 11.10 Mythtv 0.24.1.

The box has two PCI tuner cards, and a dual tuner HDhomerun box.

Due to the different methode of tuning I have configured two different
video sources, one for the two PCI tuner cards, and one for the hdhomerun

The problem is, that if I enable EIT scan on the video source for the 
I get my backend log filled with messages like this:

2011-11-08 10:43:51.765 Program #7000 not found in PAT!
Program Association Table
  PSIP tableID(0x0) length(61) extension(0x488)
       version(8) current(1) section(0) last_section(0)
          tsid: 1160
  programCount: 13
   program number     0 has PID 0x  10   data  0x 0 0x 0 0xe0 0x10
   program number   600 has PID 0x 261   data  0x 2 0x58 0xe2 0x61
   program number   610 has PID 0x 26b   data  0x 2 0x62 0xe2 0x6b
   program number   620 has PID 0x 275   data  0x 2 0x6c 0xe2 0x75
   program number   630 has PID 0x 27f   data  0x 2 0x76 0xe2 0x7f
   program number   640 has PID 0x 289   data  0x 2 0x80 0xe2 0x89
   program number   650 has PID 0x 293   data  0x 2 0x8a 0xe2 0x93
   program number   660 has PID 0x 29d   data  0x 2 0x94 0xe2 0x9d
   program number   670 has PID 0x 2a7   data  0x 2 0x9e 0xe2 0xa7
   program number   690 has PID 0x 2bb   data  0x 2 0xb2 0xe2 0xbb
   program number   929 has PID 0x 115   data  0x 3 0xa1 0xe1 0x15
   program number   939 has PID 0x 114   data  0x 3 0xab 0xe1 0x14
   program number   960 has PID 0x 116   data  0x 3 0xc0 0xe1 0x16

2011-11-08 10:43:52.709 ProcessPAT: Program not found in PAT.
                         Rescan your transports.
2011-11-08 10:43:52.804 Desired program #7000 not found in PAT.
                         Cannot create single program PAT.
2011-11-08 10:45:15.764 Program #6430 not found in PAT!
Program Association Table
  PSIP tableID(0x0) length(57) extension(0x406)
       version(17) current(1) section(0) last_section(0)
          tsid: 1030
  programCount: 12
   program number     0 has PID 0x  10   data  0x 0 0x 0 0xe0 0x10
   program number   740 has PID 0x 117   data  0x 2 0xe4 0xe1 0x17
   program number  2460 has PID 0x 9a5   data  0x 9 0x9c 0xe9 0xa5
   program number  2820 has PID 0x b0d   data  0x b 0x 4 0xeb 0x d
   program number  2830 has PID 0x b17   data  0x b 0x e 0xeb 0x17
   program number  2850 has PID 0x bc1   data  0x b 0x22 0xeb 0xc1
   program number  2890 has PID 0x b53   data  0x b 0x4a 0xeb 0x53
   program number  2930 has PID 0x b7b   data  0x b 0x72 0xeb 0x7b
   program number  2970 has PID 0x ba3   data  0x b 0x9a 0xeb 0xa3
   program number  3050 has PID 0x bf3   data  0x b 0xea 0xeb 0xf3
   program number  3060 has PID 0x bfd   data  0x b 0xf4 0xeb 0xfd
   program number  3070 has PID 0x c07   data  0x b 0xfe 0xec 0x 7

I have tried to rescan the channels several times, with no change to 
this problem,
EIT Scan works fine from my two PCI card tuners. All tuners are 
connected to the
same DVB-C source (Danish cable provider "YouSee").

So I cen get rid of the errors by disabling the EIT scan on the hdhomerun
tuners; but that gives me a different problem.

If I do not have EIT scan on the HDhomerun, and select to record 3 programs
that overlap, I get conflicts, mythtv will simply not select the 
hdhomerun tuner,
unless I schedule a manual recording, without using the program guide.

Are there a way, to tell mythtv, that EIT data received from one video 
is also valid for the other source, or are there a way get rid of these 
from the hdhomerun tuners.

I have read somewhere, that this could be a problem caused by the data 
sent by the
cable provider; but as it only happens on the hdhomerun tuners, that 
does not sound
like the case in my setup.


More information about the mythtv-users mailing list