[mythtv-users] Training IR Blaster for Uverse

[Ryan Rustong]

>From my limited experience, if the blaster is lighting up but the STB is not
reacting, either the codes are not right for your box or the blaster is not
quite in the right location. It sounds like the LIRC config is correctly
recognizing your blaster and sending signals to it, but the STB is not
receiving them.  Keep in mind the blasters are very short range and must be
placed in exactly the right location.  Also, you could try one of the
scripts that sends every known power code to the STB to see if your STB
requires a different set of codes.

-Ryan


On Sat, Feb 19, 2011 at 6:04 PM, blake <dsblakewatson at gmail.com> wrote:

> Thanks for the scripts and configs, Tony, John and Ryan. I think I'm not
> quite there, unfrortunately.
>
> What I notice is that the light on the box isn't flashing at all. The
> blaster is lighting up, but no flicker from the Uverse box. I've been using
> Tony's script--and then just irsend just to try to get some reaction out of
> it.
>
> I'm using mythbuntu and I've kept the remote as an MCE remote and put the
> IR Transmitter as USB MCE for a Motorola cable box.
>
> Do I need to drop down a little lower and set up a file directly (lircd,
> maybe)?
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.mythtv.org/pipermail/mythtv-users/attachments/20110222/d0cee2dd/attachment.html