[mythtv-users] Need help with Hauppauge HRV-1600 IR Blaster and lirc_zilog in Mythbuntu .23/10.04

[David Lasker]

Hi Jarod, thanks for the reply!

It's sorta working now, but I always get a crash of lircd on bootup. I don't
see any errors in dmesg or syslog. There isn't much useful info in
/var/log/lircd, just:

Jul  4 08:55:16 mythtv lircd: lircd(default) ready, using
/var/run/lirc/lircd
Jul  4 08:55:16 mythtv lircd: caught signal

It always seems to recover when I run 
/etc/init.d/lirc restart.

Maybe this is a result of adding the "unsigned int" to lirc.h? Or maybe it's
an initialization order problem?

Is there any way I can get additional info (like a backtrace) to help debug
this?

After deleting the transmitter section as you suggested, I now have only a
single lircd socket, but there are still 2 /dev/lircx devices:

crw-rw---- 1 root root 61, 0 2010-07-04 08:55 /dev/lirc0
crw-rw---- 1 root root 61, 1 2010-07-04 08:55 /dev/lirc1
lrwxrwxrwx 1 root root    19 2010-07-04 09:03 /dev/lircd ->
/var/run/lirc/lircd

Is that OK?

Thanks for the help!

Dave

-----Original Message-----
From: mythtv-users-bounces at mythtv.org
[mailto:mythtv-users-bounces at mythtv.org] On Behalf Of Jarod Wilson
Sent: Saturday, July 03, 2010 7:19 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Need help with Hauppauge HRV-1600 IR Blaster and
lirc_zilog in Mythbuntu .23/10.04

In short, the proper hardware.conf for your device should omit all
references to lirc_dev, as well as removing the redundant
TRANSMITTER_* lines. All you need is the one section and the one
lircd.conf from Mark's pages, which has all the needed bits for both
rx from the bundled remote and tx.

-- 
Jarod Wilson
jarod at wilsonet.com
_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users