[mythtv-users] Lirc and logitech harmony
Andrew Close
aclose at gmail.com
Fri Oct 23 19:46:25 UTC 2009
On Wed, Oct 21, 2009 at 4:39 PM, Andrew Close <aclose at gmail.com> wrote:
> On Wed, Oct 21, 2009 at 4:30 PM, jansenj <jansenj+myth at gmail.com> wrote:
>> I Have a logitech harmony remote that I would like to play around with using
>> for myth. I noticed Logitech has Mythtv profile for Mythbuntu which looks
>> like it is a hauppage remote possibly. I also noticed there was a logitech
>> profile in mythbuntu for lirc. But the logitech option in mythbuntu is not
>> for the same remote as the logitech software set my remote up as.
>>
>> Does anyone have a recommendation of what profile pairing to use to get
>> maximum use out of the remote (it does have multiple pages of buttons for
>> each device). I would need to know what product to tell logitech remote to
>> emulate, then the appropriate lirc conf files for that remote. If it
>> matters to anyone, I have the 550 and for the receiver I'm using hdhomerun.
>>
>> I figured there have got to be plenty of people out there that use a
>> logitech harmony on myth. I just didn't want to spend a lot of time
>> training either one for a bunch of commands. Any recommendations on
>> configuration pairings that would take minimal changes?
>>
>> Historically, I've used an ATI remote wonder plus (RF), but I'd like to just
>> drop down to the one remote if possible since I already have it controlling
>> everything else.
>
> i'm using a Harmony remote (7xx?) with MythBuntu 8.10 right now. i'm
> pretty sure i used their profile directly and didn't monkey with it.
> it supports all the functions i use, ff, rw, comm skip...
> i've been very happy with it.
> if i remember tonight, i'll pull my lirc.conf and post it for you. i
> would guess it would be the same for the 500, 550 remotes.
i did say 'if i remember'. :)
ok, apparently i'm using the default Hauppage lirc.conf that ships
with MythBuntu:
$ cat /usr/share/lirc/remotes/hauppauge/lircd.conf.hauppauge
#
# this config file was automatically generated
# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999
#
# contributed by Jens Leuschner <leuschner at gmx.net>
#
# brand: Hauppauge
# model:
# supported devices: WinTV primo; WinTV pci; WinTV radio
#
# This config file will work with both homebrew receivers and
# original Hauppauge TV cards !!!
#
begin remote
name Hauppauge
bits 13
flags SHIFT_ENC
eps 30
aeps 100
one 950 830
zero 950 830
plead 960
gap 89584
repeat_bit 2
begin codes
TV 0x000000000000100F
RADIO 0x000000000000100C
FULL_SCREEN 0x000000000000102E
CH+ 0x0000000000001020
CH- 0x0000000000001021
VOL- 0x0000000000001011
VOL+ 0x0000000000001010
MUTE 0x000000000000100D
SOURCE 0x0000000000001022
1 0x0000000000001001
2 0x0000000000001002
3 0x0000000000001003
4 0x0000000000001004
5 0x0000000000001005
6 0x0000000000001006
7 0x0000000000001007
8 0x0000000000001008
9 0x0000000000001009
0 0x0000000000001000
RESERVED 0x000000000000101E
MINIMIZE 0x0000000000001026
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003
#
# contributed by
#
# brand: Hauppauge
# model no. of remote control:
# devices being controlled by this remote: PVR 2/350
#
begin remote
name hauppauge_pvr
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 969 811
zero 969 811
plead 1097
gap 114605
toggle_bit 2
begin codes
Power 0x00000000000017FD
Go 0x00000000000017FB
1 0x00000000000017C1
2 0x00000000000017C2
3 0x00000000000017C3
4 0x00000000000017C4
5 0x00000000000017C5
6 0x00000000000017C6
7 0x00000000000017C7
8 0x00000000000017C8
9 0x00000000000017C9
Back/Exit 0x00000000000017DF
0 0x00000000000017C0
Menu 0x00000000000017CD
Red 0x00000000000017CB
Green 0x00000000000017EE
Yellow 0x00000000000017F8
Blue 0x00000000000017E9
Ch+ 0x00000000000017E0
Ch- 0x00000000000017E1
Vol- 0x00000000000017D1
Vol+ 0x00000000000017D0
Ok 0x00000000000017E5
Mute 0x00000000000017CF
Blank 0x00000000000017CC
Full 0x00000000000017FC
Rewind 0x00000000000017F2
Play 0x00000000000017F5
Forward 0x00000000000017F4
Record 0x00000000000017F7
Stop 0x00000000000017F6
Pause 0x00000000000017F0
Replay 0x00000000000017E4
Skip 0x00000000000017DE
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004
#
# contributed by
#
# brand: Hauppauge 350
# Created: G.J. Werler (The Netherlands)
# Project: Mythtv Fedora Pundit-R www.mythtvportal.com
# Date: 2004/11/28
# model no. of remote control: Hauppauge A415-HPG
# devices being controlled by this remote: PVR-350
#
begin remote
name Hauppauge_350
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 969 811
zero 969 811
plead 1097
gap 114605
toggle_bit 2
begin codes
Go 0x00000000000017BB
Power 0x00000000000017BD
TV 0x000000000000179C
Videos 0x0000000000001798
Music 0x0000000000001799
Pictures 0x000000000000179A
Guide 0x000000000000179B
Radio 0x000000000000178C
Up 0x0000000000001794
Left 0x0000000000001796
Right 0x0000000000001797
Down 0x0000000000001795
OK 0x00000000000017A5
Back/Exit 0x000000000000179F
Menu/i 0x000000000000178D
Vol+ 0x0000000000001790
Vol- 0x0000000000001791
Prev.Ch 0x0000000000001792
Mute 0x000000000000178F
Ch+ 0x00000000000017A0
Ch- 0x00000000000017A1
Record 0x00000000000017B7
Stop 0x00000000000017B6
Rewind 0x00000000000017B2
Play 0x00000000000017B5
Forward 0x00000000000017B4
Replay/SkipBackward 0x00000000000017A4
Pause 0x00000000000017B0
SkipForward 0x000000000000179E
1 0x0000000000001781
2 0x0000000000001782
3 0x0000000000001783
4 0x0000000000001784
5 0x0000000000001785
6 0x0000000000001786
7 0x0000000000001787
8 0x0000000000001788
9 0x0000000000001789
Asterix 0x000000000000178A
0 0x0000000000001780
# 0x000000000000178E
Red 0x000000000000178B
Green 0x00000000000017AE
Yellow 0x00000000000017B8
Blue 0x00000000000017A9
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005
#
# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at
# members of linux user group Vorarlberg www.lugv.at
#
# for ir remote controler from Hauppauge WinTV Nexus-S
# most of the keys are supported
#
# brand: Hauppauge
# model no. of remote control: WinTV Nexus-S
# devices being controlled by this remote:
#
begin remote
name Hauppauge_WinTV_Nexus-S
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 944 828
zero 944 828
plead 980
gap 113932
min_repeat 1
toggle_bit 2
begin codes
Up 0x0000000000001794
Down 0x0000000000001795
Left 0x0000000000001796
Right 0x0000000000001797
Power 0x00000000000017BD
Ok 0x00000000000017A5
Menu 0x000000000000178D
Back 0x000000000000179F
Red 0x000000000000178B
Green 0x00000000000017AE
Yellow 0x00000000000017B8
Blue 0x00000000000017A9
0 0x0000000000001780
1 0x0000000000001781
2 0x0000000000001782
3 0x0000000000001783
4 0x0000000000001784
5 0x0000000000001785
6 0x0000000000001786
7 0x0000000000001787
8 0x0000000000001788
9 0x0000000000001789
Play 0x00000000000017B5
Pause 0x00000000000017B0
Stop 0x00000000000017B6
Record 0x00000000000017B7
FastFwd 0x00000000000017B4
FastRwd 0x00000000000017B2
Channel+ 0x00000000000017A0
Channel- 0x00000000000017A1
Volume+ 0x0000000000001790
Volume- 0x0000000000001791
Mute 0x000000000000178F
Timers 0x000000000000178A
Recordings 0x000000000000178E
Back 0x000000000000179F
Record 0x00000000000017B7
Pause 0x00000000000017B0
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.8.3pre1(default) on Sat Jun 21 12:36:46 2008
#
# contributed by Matthew Wright
#
# brand: Hauppauge (HRV-1600 RT Remote)
# model no. of remote control: A415-HPG-A
# devices being controlled by this remote:
#
begin remote
name Hauppauge
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 919 852
zero 919 852
plead 930
gap 112908
toggle_bit_mask 0x800
begin codes
power 0x17BD
go 0x17BB
tv 0x179C
videos 0x1798
music 0x1799
pictures 0x179A
guide 0x179B
radio 0x178C
exit 0x179F
menu 0x178D
prevch 0x1792
mute 0x178F
up 0x1794
down 0x1795
left 0x1796
right 0x1797
ok 0x17A5
volup 0x1790
voldown 0x1791
chup 0x17A0
chdown 0x17A1
record 0x17B7
stop 0x17B6
rewind 0x17B2
fastfwd 0x17B4
play 0x17B5
replay 0x17A4
skip 0x179E
pause 0x17B0
1 0x1781
2 0x1782
3 0x1783
4 0x1784
5 0x1785
6 0x1786
7 0x1787
8 0x1788
9 0x1789
* 0x178A
0 0x1780
# 0x178E
red 0x178B
green 0x17AE
yellow 0x17B8
blue 0x17A9
sub/cc 0x178E
text 0x178A
home 0x17BB
end codes
end remote
begin remote
name HVR-1100
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
gap 135862
pre_data_bits 16
pre_data 0x8001
begin codes
Go 0x0161
power 0x0074
Tv 0x0179
Videos 0x0189
Music 0x0188
Pictures 0x016F
Guide 0x016D
Radio 0x0181
Up 0x0067
Down 0x006C
Left 0x0069
Right 0x006A
Ok 0x001C
Back/edit 0x00AE
Menu 0x008B
Vol+ 0x0073
Vol- 0x0072
PrevChan 0x019C
Chan+ 0x0192
Chan- 0x0193
Mute 0x0071
Record 0x00A7
Stop 0x0080
replay 0x00A8
SKip 0x00D0
play 0x00CF
Previous 0x00A5
Next 0x00A3
Pause 0x0077
1 0x0002
2 0x0003
3 0x0004
4 0x0005
5 0x0006
6 0x0007
7 0x0008
8 0x0009
9 0x000A
* 0x0184
0 0x000B
# 0x0172
red 0x018E
green 0x018F
yellow 0x0190
blue 0x0191
end codes
end remote
--
Andrew Close
More information about the mythtv-users
mailing list