[mythtv-users] Hauppauge HVR-4000
Erwin Panen
erwinpanen at fastmail.fm
Sat Nov 28 01:19:20 UTC 2009
Okay,
For testing setup Ubuntu 0910 with MyhtTV 0.22.
HVR-4000 properly registered, no problem there.
Entering mythtv-setup selection of correct frontend available, no problem.
-> Scanning does not work
-> trouble with scanning is also that 'some' country is always selected,
but Belgium is not in the list of course - and this seems to influence
channels being scanned. I tried Austria and France with no luck.
When using scan -f 1 -d 1 be-Schoten, channels are properly scanned and
seen:
---------------------------------------------------------------------------------
linuxmce at dcerouter:~$ scan -f 1 -d 1 be-Schoten > erwin.conf
scanning be-Schoten
using '/dev/dvb/adapter0/frontend1' and '/dev/dvb/adapter0/demux1'
initial transponder 506000000 0 2 9 3 1 0 0
>>> tune to:
506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
0x0000 0x1090: pmt_pid 0x1090 VRT -- Klara continuo (running)
0x0000 0x1080: pmt_pid 0x1080 VRT -- MNM (running)
0x0000 0x1070: pmt_pid 0x1070 VRT -- Studio Brussel (running)
0x0000 0x1060: pmt_pid 0x1060 VRT -- Klara (running)
0x0000 0x1040: pmt_pid 0x1040 VRT -- Radio 1 (running)
0x0000 0x1050: pmt_pid 0x1050 VRT -- Radio 2 (running)
0x0000 0x1010: pmt_pid 0x1010 VRT -- EEN (running)
0x0000 0x1020: pmt_pid 0x1020 VRT -- Canvas/Ketnet (running)
0x0000 0x10b0: pmt_pid 0x10b0 VRT -- Canvas+/Ketnet+ (running)
0x0000 0x10a0: pmt_pid 0x10a0 VRT -- Sporza (running)
0x0000 0x10c0: pmt_pid 0x10c0 VRT -- Nieuws+ (running)
0x0000 0x10d0: pmt_pid 0x10d0 VRT -- MNM hits (running)
Network Name 'VRTmux1'
>>> tune to:
482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
0x0001 0x1090: pmt_pid 0x1090 VRT -- Klara continuo (running)
0x0001 0x1080: pmt_pid 0x1080 VRT -- MNM (running)
0x0001 0x1070: pmt_pid 0x1070 VRT -- Studio Brussel (running)
0x0001 0x1060: pmt_pid 0x1060 VRT -- Klara (running)
0x0001 0x1040: pmt_pid 0x1040 VRT -- Radio 1 (running)
0x0001 0x1050: pmt_pid 0x1050 VRT -- Radio 2 (running)
0x0001 0x1010: pmt_pid 0x1010 VRT -- EEN (running)
0x0001 0x1020: pmt_pid 0x1020 VRT -- Canvas/Ketnet (running)
0x0001 0x10b0: pmt_pid 0x10b0 VRT -- Canvas+/Ketnet+ (running)
0x0001 0x10a0: pmt_pid 0x10a0 VRT -- Sporza (running)
0x0001 0x10c0: pmt_pid 0x10c0 VRT -- Nieuws+ (running)
0x0001 0x10d0: pmt_pid 0x10d0 VRT -- MNM hits (running)
Network Name 'VRTmux1'
dumping lists (24 services)
Done.
---------------------------------------------------------------------------------------------------
contents of be-Schoten:
# Tournai - Belgique
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
T 506000000 8MHz 2/3 NONE QAM64 8k 1/32 NONE
----------------------------------------------------------------------------------------------------
I've tried to put together my channels.conf file as follows:
----------------------------------------------------------------------------------------------------
EEN:506000000:QAM_64:4113:4114:4112
Canvas/Ketnet:506000000:QAM_64:4129:4130:4128
Canvas+/Ketnet+:506000000:QAM_64:4273:4274:4272
EEN:482000000:QAM_64:4113:4114:4112
Canvas/Ketnet:482000000:QAM_64:4129:4130:4128
Canvas+/Ketnet+:482000000:QAM_64:4273:4274:4272
-----------------------------------------------------------------------------------------------------
Next I'v tried 2 more steps:
- mythtv-setup -> input connections there set to import the above
channels.conf -> gives an error
- mythtv-setup -> input connections - don't remember exactly what it's
named, but you can enter freq, QAM etc.
tried several possibilities, most settings to auto, but also filled
in with settings from be-Schoten: no channels found...
I'm out of ideas at the moment...
Any idea's?
Thanks for your suggestions!!
Erwin
Stephen Robertson wrote:
> 2009/11/26 Erwin Panen <erwinpanen at fastmail.fm>:
>
>> Hi list,
>>
>> I'm looking for confirmation of people who have the Hauppauge HVR-4000 up
>> and working.
>> Detail:
>> - dvb-s
>> - dvb-t (most important for me)
>> - what viewing solution used: mythtv? / other
>>
>> I have the card recognized and registered (Kubuntu 0810).
>> Channel searching DVB-T works out of the box with Kaffeine.
>>
>> Trying to get this card to work with MythTV v0.21
>>
>> Thanks for your help,
>>
>> Erwin
>>
>
> What is not working for you? How far do you get when trying to use
> this within MythTV?
>
> Stephen.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20091128/8b267229/attachment.htm>
More information about the mythtv-users
mailing list